Product Manual

30
SERVICING YOUR PUMP
ENGINE OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Place a suit
able container below the engine to catch the used oil, and
then remove the oil filler cap, drain plug, and sealing washer.
2. Allow the
used oil to drain completely into an approved container,
and then reinstall th
e drain plug with a new sealing washer and
tighten it securely.
3. With the engine in a level position, fill to the edge of the oil filler hole
with the recommended oil (see page 31).
Maximum oil capacity: WT20X
...................19 oz (0.58 L)
WT30X/WT40X .....37 oz (1.1 L)
The Oil Alert system will automatically stop the engine before the oil
level falls below
the safe limit. However, to avoid the inconve
nience
of an unexpected shutdown, fill to the upper limit, and check the oil
level regularly.
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of used motor oil properly.
Put it in a sealed container, and take it a recycling center. Do not
throw it in the trash, pour it on the ground, or pour it down a drain.
4. Screw in the oil filler cap securely.
SEALING WASHER
OIL LEVEL
DRAIN PLUG
OIL FILLER CAP
31YG0611-01.fm 30 ページ ２０１４年５月２９日 木曜日 午後４時９分