Instructions / Assembly

Before You Start

Read each step carefully before starting. It is very important

to ensure each step followed in correct order, otherwise

assembly difficulties may occur.

Most of board parts are labeled or stamped on the raw

edges. Have a check to make sure all parts are included.

Work in a spacious area, preferably on a carpet close to

where the unit will be used.

Keep the handtools close at hand. Do not use power tools to

assemble your furniture. They may scratch or damage the

parts.

Notice

50% tighten before fixing all screws, Allen wrench is recommended

instead of an electric drill.

Place the item on a flat ground to adjust and make sure it remains

stable.

Tighten up all screws with tools gradually.

If the screws are not aligned with holes during assembly, please

loosen all the other screws to 50% and continue the assembly

process.

If the item is not stable, please loosen all the screws, adjust it on a

flat ground and tighten up all screws again.

Note: If one or some screws are fully tightened during assembly,

the others may not be aligned with the holes. In addition, all the

holes are designed to be relatively larger to provide more space

for the adjustment of the screws.

PAGE 1
H E Before You Start B A to ensure each step followed in correct order, otherwise assembly difficulties may occur. edges. Have a check to make sure all parts are included. D C Read each step carefully before starting. It is very important Most of board parts are labeled or stamped on the raw G F Notice Work in a spacious area, preferably on a carpet close to 50% tighten before fixing all screws, Allen wrench is recommended where the unit will be used. instead of an electric drill.
PAGE 2
Hardware List Parts List A 2 pcs B C 2 pcs 2 pcs BOLT 1 D E 2 pcs 2 pcs F 2 pcs x 20 2 M6 x 50mm STEEL WASHER G 2 pcs H 2 pcs 4 x 36 M6X14 x 12 3 M6 x 25mm x4 M6 x 15mm PLASTIC WASHER 5 x8 M6X20 ALLEN KEY 6 x2 M4 04 05
PAGE 3
STEP 01 STEP 03 D E 6 C 3 D C 1 4 4 3 5 D C x2 STEP 02 x2 STEP 04 5 E 1 1 4 1 2 4 2 D 4 A A C G D G E 06 C x2 x2 07
PAGE 4
STEP 05 1 2 STEP 07 4 2 B H E 1 4 H D C C x2 x2 STEP 06 STEP 08 C 4 2 F 1 08 4 F x2 09
PAGE 5
STEP 09 Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.