Data Sheet

RTY Series
2 http://sensing.honeywell.com
Table 1. Specifications
Characteristic
Parameter
LV (Low Voltage)
HV (High Voltage)
Supply voltage
5 ±0.5 Vdc
10 Vdc to 30 Vdc
Supply current
20 mA max.
32 mA max.
Supply current (during output to ground short)
25 mA max.
47 mA max.
Output
0.5 V to 4.5 V ratiometric
0.5 V to 4.5 V non-ratiometric
Output signal delay
4 ms typ.
Overvoltage protection
10 Vdc
Reverse polarity protection
-10 Vdc
-30 Vdc
Output to ground short circuit protection
continuous
Output load resistance (pull down to ground)
10 kOhm
EMI:
radiated immunity
conducted immunity
100 V/m from 200 MHz to 1000 MHz per ISO11452-2
100 mA BCI per ISO11452-4
from 1 MHz to 200 MHz
100 mA BCI per ISO11452-4
from 1 MHz to 400 MHz
EMC
exceeds CE requirements
Operating temperature range
-40 °C to 125 °C [-40 °F to 257 °F]
Storage temperature range
-40 °C to 125 °C [-40 °F to 257 °F]
Ingress protection
IP67 according to DIN 40050
Expected life
35 M cycles
Media compatibility
heavy transportation fluids
Housing material
PBT plastic
Shock
50 G peak
Vibration
20 G peak tested from 10 Hz to 2000 Hz
Salt fog
concentration 5% ±1% for 240 hr per SAE M1455 Section 4.3.3.1
(at 5.0 Vdc. 38 °C [100 F °])
Resolution
12 bit
Mating connector
AMP Superseal 282087-1
Mechanical end stop
no
Approvals
CE