Installation Instructions

Installation
Part No.: 4417781 Wireless Field Interface
Installation Manual 4 - 3
4.3 Install the power cable
The mains input enter the enclosure through a dedicated gland located
at the bottom of the enclosure.
The mains input (Line and Neutral) cable wires terminate on the PSX
module connector. The mains input earth wire terminates on one of the
PE points provided inside the enclosure. From the PE point inside the
enclosure, the PSX gets the PE connection through the wire terminated
on the PSX connector.
FIGURE 4-2 WFI - Mains cable wiring
Mains Input