Installation Instructions

General
Part No.: 4417781 Wireless Field Interface
Installation Manual 1 - 1
CHAPTER 1 GENERAL
1.1 Using this installation guide
Wireless Field Interface (WFI) adds wireless capability to the existing
Servo or Radar Gauge by supporting BPM Protocol, Compliance with
ISA100 standards. The Wireless field interface can communicate with
Servo or Radar Gauge through Honeywell Enraf field bus Bi-Phase
Mark, Process the data and forward that information wirelessly to the
OneWireless server compliant with ISA100 standards.
1.2 Related documents
 Wireless Field Interface Safety instructions for installation, commis-
sioning, operation, and maintenance
 Wireless Field Interface Service Manual
 Control drawings for FM and CSA
1.3 Target Audience for this Manual
This manual is intended for engineers and technicians, who are
assigned to install, commission, and service the WFI. Also, all
Honeywell Enraf customers who use wireless devices.
1.4 Contact
Head Office - Delft, The Netherlands
Honeywell Enraf
Delftechpark 39, 2628 XJ Delft
PO Box 812, 2600 AV Delft
The Netherlands
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]
Website: http://www.honeywell.com/ps