User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 53
6.4.5.2.7 Relay Output Transducer Block Settings
The Relay output transducer blocks are standard Binary Output
transducer blocks. (In contrast to all other transducer blocks, which are
Analog Input transducer blocks.)
There are 4 relay output blocks, each representing one of the 4 relays
that can be installed in the SmartRadar FlexLine. These transducer
blocks can be used to remotely control the relays, provided these relays
are programmed as remote controllable in Engauge.
For sample screens and parameter descriptions, see below.
Parameter Description
Name Here you can specify the name of the transducer block.
Associated Device The device that contains the transducer block you are editing.
The device name is set during commissioning with Wireless Builder and is stored in
the TAG descriptor entity.