User Manual

Commissioning
SmartRadar FlexLine Part No.: 4417.762_Rev07
6 - 54 Service Manual
Actual Mode The actual operation mode of the transducer block. This may differ from the normal
mode, for example if the device is Out of Service.
Normal Mode This is the mode the transducer block should be in, in normal situations.
Permitted Mode With these check boxes you can select the permitted modes for the transducer block.
Binary Output Variable This field can be used to control the relay. This field has no function if the relay itself is
not programmed to be a remote controlled relay.
Binary Read back value This is the read-back value that represents the actual position of the relay.
Parameter Description
Stale Lim Publication data stale limit. For more details, see OneWireless documentation.
Period This setting determines the publication time for the primary variable of this transducer
block. This can be 1, 5, 10, or 30 seconds. For more details, see OneWireless
documentation.
Parameter Description