User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 87
NOTE: The LEDs do not indicate the physical relay state
(coil state or contacts state), as this depends on the
software settings and the physical settings (jumper),
see 6.6.3.
☛ Set the value of the
[LED Association] entity as desired (optional). For
an example, see table below.
6.6.7 Terminal Allocation
*) See jumper settings, section 6.6.3.1.
LED Association LED Number Relay Number
1 + 2 LE2 1
LE3 2
3 + 4 LE2 3
LE3 4
Terminal Number Name Function
14 Ry1_a Relay 1 Common
15 Ry1_b Relay 1 NO or NC*
16 Ry2_a Relay 2 Common
17 Ry2_b Relay 2 NO or NC*
18 Ry3_a Relay 3 Common
19 Ry3_b Relay 3 NO or NC*
20 Ry4_a Relay 4 Common
21 Ry4_b Relay 4 NO or NC*