User Manual

System Architecture
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 3 - 1
CHAPTER 3 SYSTEM ARCHITECTURE
3.1 SmartRadar FlexLine Architecture
The SmartRadar FlexLine system is built up from interchangeable
hardware modules. These modules consist of uniform printed circuit
boards (PCBs), each of them representing a different, unique
functionality. Together with the software implemented on these
hardware parts, each PCB makes up a so-called FlexConn module.
These modules communicate with each other via the serial CAN-bus on
the DIN rail backplane - on which they are mounted - or wireless by
using the OneWireless Network option. See FIGURE 3-1.
ESF07-0026
FIGURE 3-1 SmartRadar FlexLine system architecture overview
C
A
N
-
b
u
s
HCI-GPU HCI-BPM
HCI-1WL
FII-SMV
FII-DO
FCI-HT
TII-XR
FII-VT
Mains
Supply
PSX
GPU
BPM
RS-232/485
RS-232/485
RS-232/485
RS-232/485
2 or 4
Alarm relays
762 VITO
INTERFACE
temperature and/or
water bottom
measurement
PRESSURE
TRANSMITTERS
HIMS or
vapour pressure
measurement
and/or
external water probe
(HART-bus)
RADAR ANTENNA
level measurement
ONEWIRELESS
ANTENNA
wireless gauge
connection
ENTIS PRO
ENTIS XS
Integrated
SmartView
Stand-alone
SmartView
Portable
SmartView
Enraf
field bus
Lantronix Lantronix
OneWireless
Gateway
OneWireless
Gateway