User Manual

System Architecture

SmartRadar FlexLine Part No.: 4417.762_Rev07

3 - 4 Service Manual

 Jumpers:

With the jumpers, specific hardware settings can be made:

a) For an explanation of the entities concept, see 3.3.

 Health LED

The Health LED (= LE1, the blue one) indicates the general health

status of the FlexConn module:

 2 function LEDs

These LEDS indicate module-specific activities, such as for instance

data being transmitted or received.

Jumper

Number

Function

1 all warning and monitoring-related commissioning entities

are

protected and cannot be changed

2 the password is protected from being read

3 all commissioning entities are protected and cannot be changed

4 board-specific jumper

5 board-specific jumper

Health Status Flashing Pattern

Good

Uncertain

Bad