User Manual

System Architecture
SmartRadar FlexLine Part No.: 4417.762_Rev07
3 - 8 Service Manual
3.3.1.2 Commissioned Entity
The “Commissioned” entity informs the end user if the most important
commissioning entities of the concerned FlexConn module and its
implemented functions are set correctly.
 True = the most important entities are set correctly
 False = the most important entities are not set correctly
3.3.2 Generic Entity
The following command entities are implemented as generic functions:
 “Reset device”
 “Reset board”
The following information is available through the entities:
 “Board name” = FlexConn module name
 “Board hardware version” = Hardware version of the FlexConn PCB
 “Firmware version” = Version of the software running on the
FlexConn module
De firmware (software) version data is built up according to the format
below:
The last digit will not been shown in the official or formal releases.
3.3.3 Function-specific Entities
For the function-specific entities, see Chapter 6 - Commissioning.
A 1 0 0 0 0
internal preliminary
bug fixes
minor functionality
warning + measuring data related part
main functionality
hardware modifications