User Manual

Service Tools

Part No.: 4417.762_Rev07 SmartRadar FlexLine

Service Manual 4 - 15

 On selection of an available entity, the [value edit] screen is presented

(see FIGURE 4-16).

· If an invalid value is entered, the message “value out of range” will

be displayed.

· If the value is not accepted by the FlexConn module, the message

“value not accepted” will be displayed.

· You can scroll along the characters by push and hold the up

button.

· An entity modification is only executed on simultaneously

pressing the left + right button. After this, first a range check is

done. If the modification is accepted, you will be returned to the

[value edit] screen.

· The cursor can be shift to the right by pressing the right button.

· You can return to the

[entity list] screen by pressing the left button.

NOTE: By using the left button to return to the

[entity list]

screen without executing the modification(s) by

pressing the left + right button simultaneously will

undo this (these) modification(s)!

ESF07-0037

FIGURE 4-16 Examples of the value edit screen

MAIN