User Manual

Installation
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 5 - 1
CHAPTER 5 INSTALLATION
 Before starting with commissioning activities, first make sure all
mechanical and electrical installation aspects have been
completed correctly.
 For installation, see the Installation Guide for the SmartRadar
FlexLine.
 In case the OneWireless Communication Option (HCI-1WL) is
installed, a lightning arrestor is integrated by default. The lightning
arrestor (see figure below) will prevent the inside electronics from
being affected in case of a nearby lightning strike. Although it will
protect against multiple discharges, it can be replaced as a
preventive maintenance action. Preventive maintenance interval
depends on location, position of the equipment, grounding, and other
protection measures installed.
NOTE: Contact our service department for any guidance if
needed, via e-mail: [e-mail]
2
1
communication antenna
lightning arrestor