User Manual

General
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 1 - 1
CHAPTER 1 GENERAL
1.1 Target Group for this Service Manual
This SmartRadar FlexLine Service Manual is meant
for service
engineers who are assigned to commission a SmartRadar FlexLine.
1.2 Structure of this Manual
1.3 Related Documents
 SmartRadar FlexLine Safety instructions for installation, commis-
sioning, operation, and maintenance; shipped with the device
 Installation Guide SmartRadar Antennas
 CE Declaration of Conformity [not available for OneWireless option]

EC-Type Examination Certificate [not available for OneWireless option]

IEC-Ex Certificate of Conformity [not available for OneWireless option]

FCC Authorization
 Control drawings for FM and CSA
 OneWireless Wireless Builder User’s Guide
 OneWireless Key Server Manager User’s Guide
Chapter Title Contents Description
1 - GENERAL This introductory manual part
2 - SAFETY Here all safety-related information is housed. All
essential and mandatory safety instructions, pre-
cautions, and measures are described here.
Moreover, the used safety conventions, the label-
ling information, and compliance information can
be found in this chapter.
3 - SYSTEM ARCHITECTURE This chapter gives an introductory impression of
the SmartRadar FlexLine’s modular-shaped hard-
ware architecture.
4 - SERVICE TOOLS In this chapter, both the SmartView and the
Engauge service tool are described in more detail.
5 - INSTALLATION To make sure the relevant module (s) is (are)
properly installed, before starting with commis-
sioning, only a reference is made here to the
Installation Guide for the SmartRadar FlexLine.
6 - COMMISSIONING This chapter gives all information needed for a
proper commissioning of one or more SmartRadar
FlexConn modules.