User Manual

Commissioning
Part No.: 4417.762_Rev07 SmartRadar FlexLine
Service Manual 6 - 39
6.4.5 Commissioning the HCI-1WL in the OneWireless Network
6.4.5.1 Introduction
Once the authentication process is completed, the SmartRadar can be
commissioned in the OneWireless network.
Before you continue with this step, familiarize yourself with the
Wireless Builder configuration tool for the OneWireless network. For
a detailed operation guide for the Wireless Builder, please refer to the
OneWireless Wireless Builder User’s Guide, R120 or later.
With the Wireless Builder you can create, delete, commission, load, and
unload the SmartRadar just like any other OneWireless devices. You
can also activate and inactivate transducer blocks, and program the
different parameters, such as publication period, as with any other
devices.
Once the Authentication process has been successfully completed, the
SmartRadar will automatically be listed in the Online window of
Wireless Builder as an uncommissioned device.
With a right mouse click it can be commissioned as described in the
Wireless Builder manual.
After having finished all steps before, the SmartRadar will have one
transducer block: Radar Level.
During further commissioning, more transducer blocks can be added.