User Guide

ManualsBrandsHoneywell Home ManualsDampers7" Round Automatic TrueZONE Damper

www.resideo.com

The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.

Resideo Technologies, Inc.

1985 Douglas Drive North, Golden Valley, MN 55422

1-800-633-3991

70-2321—06 M.S. Rev. 03-20 | Printed in United States

CHECK EQUIPMENT FOR CORRECT OPERATION

HZ221 or HZ311 panels

Call for heat or cool from each zone individually. Verify the equipment comes on and dampers go to correct posi-

tion. Verify CPRD relief damper is adjusted correctly (see "Setting the Regulator" on page 7).

HZ322 or HZ432 panels

From the home mode, press mode button twice to enter

checkout mode on zone panel. In checkout mode you

can:

1 Test every heat stage.

2 Test every cool stage.

3 Test emergency heat operation (if zone panel is con-

figured for a heat pump with aux heat).

4 Open and close each zone damper.

After checkout mode you should make a call for heat or cool from each thermostat to verify correct communication

to the zone panel. Also, verify CPRD relief damper is adjusted correctly (see "Setting the Regulator" on page 7).

HOME

MODE

BACK NEXT

CONFIG

CHECK OUT

ADJUST SETTING

M28194

WIRELESS