Wiring Diagrams
Table Of Contents
ADDENDUM
33-00476-01
HPZ and HSR Hydronic Panel
Wiring Diagrams
APPLICATION
This document is an addendum that shows wiring
diagrams for applications that are not shown in the
Installation Instructions that are included with each panel.
The document covers the following hydronic panels:
The document also covers some Resideo thermostats:
* Common required on Wi-Fi models. Optional on other
models.
** VisionPRO requires common wire when EIM is not
used and RedLINK accessories are used.
*** EIM required for Prestige. Thermostat uses 2 wires
only to R and C.
Table 1. Hydronic Panels.
OS Number Description
HPSR101 Single Zone Pump Controller
HPSR103 Three Zone Pump Controller
HPSR104 Four Zone Pump Controller
HPSR106 Six Zone Pump Controller
HPZC103 Three Zone Valve Controller
HPZC104 Four Zone Valve Controller
HPZC105 Five Zone Valve Controller
HPZC106 Six Zone Valve Controller
M37991
Table 2. Thermostats (select models shown)
OS Number Description
THX321WFS2001* T10 Pro Smart with RedLINK
wireless sensor (kit)
TH8321WF1001* VisionPRO Smart
TH6320WF2003* T6 Pro Smart
TH6210U2001 T6 Pro programmable
TH6100AF2004 T6 Pro Hydronic with Slab
Sensor Included
TH4110U2005 T4 Pro Programmable
TH11102009 T1 Pro non-programmable
TH1010D2000 T1 Pro (not for series 20)
YTH5320R1000 Wireless Non-Programmable
FocusPRO kit with EIM included
YTH6320R1001 Wireless Programmable
FocusPRO kit with EIM included
TH8110R1008 ** VisionPRO with RedLINK (can
be wired directly to sub-base or
used with THM5421R1021 EIM
(ordered separate)
YTHX9421R5085WW*** Prestige kit with thermostat and
EIM