User Guide

ManualsBrandsHoneywell Home ManualsElectrical Switching Relays24 V Electric Heater Relay w/ SPST Switching

Honeywell

R841C,

and

Electric Heating Relays

The

R841

Electric Heating Relays are

for

use with

two

wire, low voltage thermostats to

provide

control

electric heating equipment.

R841

Quiet, reliable operation

Suitable for controlling all 24Vac

wire heating only

thermostats

Versatile mounting.

R841C'models include the enclosure and an integral

transformer.

R841D models have an enclosure but are without

transformer.

R841E models contain two switches, have an enclo-

sure and an integral transformer

R841F models are without enclosure, with

integral transformer.

R84

models are without enclosure and

transformer.

Conduit bushing for easy mounting

(on

and

models).

Compact size allows mounting in difficult to

access locations.

Rated for baseboard loads up to

kW.

C.S.A. and

U.L.

approved.

CONTENTS

M.0'D.

05/95

Honeywell Ltd.-Honeywell Ltele. 1995 Printed in Canada Form Number 95C-1009OB

Summary of content (6 pages)

PAGE 1
Honeywell R841C, D, E, F and G Electric Heating Relays The R841 Electric Heating Relays are for use with two wire, low voltage thermostats to provide control of electric heating equipment. R841 E R841C Quiet, reliable operation Suitable for controlling all 24Vac 2 wire heating only thermostats R841F models are without enclosure, with integral transformer. Versatile mounting. R84 1G models are without enclosure and transformer. R841C'models include the enclosure and an integral transformer.
PAGE 2
R841C,D,E,F,G ELECTRIC HEAT RELAYS Specifications ORDERING INFORMATION SPECIFICATIONS Models RE41 Family Oueration: integral Enclosure with 120/240/277 Vac Transformer conduit bushing 50160 Hz 24 Vac 50160 Hz Dual Load R841F On a call for heat, the thermostat energises the low voltage resistance heater in the R841, which drives an ambient compensated bimetal to operate a SPST MicroSwitch" snap switch.
PAGE 3
Installation R841C,D,E,F,G ELECTRIC HEAT RELAYS Fig. 7 Connections for 4 R841D relays and thermostats used with one transformer. Set each thermostat heater at 0.2A Fig. 5 R841E Internal Schematic and connection diagram. n2-wire low volt thermostat w tt - ff 7) Transformer 24 V '4 Thermostats White R841 D u . White L& Add disconnect means and overload protection as required A Add disconnect means and overload protection as required Fig.
PAGE 4
Honeywell Relais pour chauffage électrique RS4lC,D,E,F et G Les relais pour chauffage électrique R841 conviennent aux thermostats bi$laires basse tension qui commandent le fonctionnement d’appareils de chauffage électrique. R841 C IFonctionnement silencieux. Conviennent à la commande de tous les thermostats 24 V bifilaires pour chauffage seulement. ISouplesse d’installation. IR841C : avec boîtier et transformateur intégré. IR841D : avec boîtier, sans transformateur.
PAGE 5
RELAIS POUR CHAUFFAGE ÉLECTRIQUE R841C, D, E, F, G 1 11 Fiche technique FICHE TECHNIQUE POUR COMMANDER Modèles : 120/240/277 V c.a. Gamme ransformateur Boîtier avec ni;t ~;lep;conduit~ c;;;; 24 V c.a. 50” Hz Hz .05 R841D RE41E A841F I GTr I Double h c; 1 . 1 Tension (50/60Hz) 120 208 240 277 347 600 Résistif 22 22 22 19 18 10 intensité à pleine charge Intensité, rotor bloqué I I 1 I 14 84 8 42 I I 7 42 I I 5 36 I I 5 29 1 1 3 17 Fig.
PAGE 6
Installation RELAIS POUR CHAUFFAGE ÉLECTRIQUE R841C, D, E, F, G Fig. 5 Diagramme interne et schéma de raccordement du R841E Fig. 7 Raccordement de quatre relais R841D et thermostats utilisés avec un transformateur. Régler la résistance anticipatrice de chaleur de chacun des thermostats à 0,2 A.