User Manual
5
Connect
Connect to Wi-Fi
Be sure you are on the same Wi-Fi network you
wish to connect your camera to.
1
Choose your Wi-Fi network from the list.
Press NEXT.
2
Enter your Wi-Fi password, if necessary.
Press DONE.
Note: The camera will beep during some steps in
this process.
Connect to mobile device
1
Enable bluetooth on your mobile device.
2
The app will look for the camera.
• For one camera, it will connect
automatically.
• For more than one camera, the app will
prompt you to select one camera at a time.
Each camera has a unique MAC ID printed
on the back. Use that ID to select the
camera you want to connect.
3
A QR code will display in the app. To connect
your camera to the app, hold the QR code
approximately 3-8 inches (7-20cm) from the
camera lens.
4
The camera LED turns purple and the camera
beeps.
Scan code to connect camera
Carrier 100%8:08 AM
NEXT
Connect
2.7-7.9 in