Submittal Sheet

T100-SERIES RADIATOR THERMOSTATS
Installation Examples
Please Note:
To avoid stone deposit and corrosion the composition of the
medium should conform with VDI-Guideline 2035
Additives have to be suitable for EPDM sealings
System has to be flushed thoroughly before initial operation
with all valves fully open
Any complaints or costs resulting from non-compliance with
above rules will not be accepted by Honeywell
Please contact us if you should have any special require-
ments or needs
Accessories
Only for T100M-F
Fig. 5. Correct and false installation positions for radiator thermostats with internal sensor
Adapter
DA-Adapter from Danfoss
snap connection RA to
M30 x 1.5
TA1010DA01
Adapter
HZ-Adapter from M28 x 1.5
with 9.5 mm closing dimen-
sion to M30 x 1.5 with
11.5 mm closing dimension
TA1010HZ01
Special tool for assembly of radiator thermostats
VA8210A001
Decoring for connection nut
white (RAL9016)
10 pair, 20 pieces
TA1000A001
chrome
10 pair, 20 pieces
TA1000A002
Theft-protection ring, white (RAL9016)
TA6900A001
Environmental and Combustion Controls
Honeywell GmbH
Hardhofweg
74821 Mosbach, Germany
Phone: +49 (6261) 810
Fax: +49 (6261) 81393
www.honeywell.com
EN0H-2026GE25 R1111
November 2011
© 2011 Honeywell International Inc.
Subject to change without notice
Manufactured for and on behalf of the Environmental and Combustion
Controls Division of Honeywell Technologies Sàrl, Z.A. La Pièce 16,
1180 Rolle, Switzerland or its Authorized Representative.