User Guide

11 63-2674—03
HOLD TEMPERATURE UNTIL
Holds the temperature temporarily until the time set by the user, or the next
scheduled period time:
1. Press an arrow key or the Override key. TEMPORARY SET TO appears on the
screen. The time defaults to the next scheduled period start time.
2. Use the Up and Down keys to change the desired temperature.
NOTE: If HEAT or COOL begins to flash, your temporary setting is at, or
beyond, the deadband. The thermostat operates based on the override
setting throughout the hold time.
3. Press NEXT.
NOTE: The ability to change settings remains for approximately seven sec-
onds. Once neither the temperature nor the time continue to flash, you
must restart at step 1 to make changes.