Owner's Manual
Table Of Contents
- Application
- Features
- Contents
- Specifications
- System Installation
- Installation Options
- Guidelines for Installing RedLINK Devices
- Installing Equipment Interface Module (if used)
- Wiring 24 Vac Common
- Selecting Discharge and Return Air Temperature Sensor Mounting Locations
- Installing Discharge and Return Air Temperature Sensors
- Selecting Thermostat Location
- Installing Wallplate
- Installing VisionPRO® 8000 with RedLINK™
- Wiring the Thermostat
- Remove Coin Cell Battery Tab
- Mounting Thermostat on Wallplate
- Power Optional RedLINK™ Accessories
- Performing Initial Setup
- Installer Tests
- Operation
- Setting the Time/Date
- Setting the Fan
- Setting System Mode
- Adjusting Program Schedules
- Overriding Schedules: Residential Use
- Overriding Schedules: Commercial Use
- Viewing Equipment Status
- Setting Vacation Hold: Residential Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Remote Setback: Commercial Use
- Adjusting Humidification Settings
- Adjusting Dehumidification Settings: Residential Use
- Adjusting Dehumidification Settings: Commercial Use
- Adjusting Ventilation Settings
- Ventilation Options
- Setting Preferences
- Cleaning the Thermostat Screen
- Adjusting Security Settings
- Viewing Dealer Information
- Advanced Features
- Installer Options
- Using the Temperature Display
- Using the Humidity Display
- Universal Outputs (U1, U2, U3)
- Universal Inputs (S1, S2, S3, S4)
- Data Logs
- Dry Contact Alerts
- Set Up the Dry Contact Alerts
- Staging Control
- Heat Pump and Backup Heat Operation
- Indoor Air Quality (IAQ) Control
- IAQ Reminders
- Customizable Reminders
- MicroSD card
- Commercial Features
- Overriding Schedules: Commercial Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Ramp Rates (Commercial Use)
- Remote Setback (Commercial Use)
- Economizer and Time of Day (TOD) Operation
- Pre-Occupancy Purge
- Battery Replacement
- Optional Accessories
- Portable Comfort Control
- Remote Indoor Sensors
- Replacing a Thermostat
- Replacing an Equipment Interface Module
- Wiring
- Zoning
- Troubleshooting
- Regulatory Information
VISIONPRO
®
8000 WITH REDLINK™
68-0312—03 100
12. When the user touches Press HERE for info on the
Home Screen, the reminder message will be displayed:
Fig. 266.
13. Pressing Select displays options for addressing the Cus-
tom Reminder message:
• View More Info
• Remind Me Later
• Dismiss
• View Dealer Info
14. Selecting View More Info displays the Custom Reminder
message.
Fig. 267.
15. To clear the Alert (and turn off the red alert light on the
thermostat), select Dismiss.
MICROSD CARD
Use a microSD (secure digital) card to save setup time by
loading Installer Setup settings, Dealer Information, Holiday
Schedules, and Custom Reminders to multiple thermostats.
The microSD card plugs into the thermostat. You will then need
a USB adapter to plug the microSD card into your computer.
These adapters are inexpensive and widely available at
electronics retailers and online.
For troubleshooting help, you can save the thermostat Data
Logs (Alerts Log and Interaction Log) to a microSD card - then
view them on your computer. Also use the microSD card to
upgrade the thermostat software.
Visit http://thermostatsetup.honeywell.com to enter your dealer
information or load new thermostat software.
Updating Thermostat Software
New thermostat software can be saved to a microSD card and
then uploaded to the VisionPRO® thermostat using the
microSD port.
1. In a web browser on your computer, go to
http://thermostatsetup.honeywell.com
2. Connect a microSD card to a USB adapter. Then con-
nect the USB adapter to your computer.
Fig. 268.
3. Download the software upgrade file to the microSD USB
adapter by clicking the indicated link on the web site.
4. When the File Download box opens, click Save.
5. When the Save As box opens, navigate to the directory
of your USB device and save the file. For example, if your
USB drive is letter “F”, navigate to “My Computer” and
then drive “F”.
6. After the file is saved, remove the microSD card from the
adapter and connect it to the thermostat. Then select the
“Software Update” option on the thermostat.
Fig. 269.
7. See “To Use the MicroSD Card in the Thermostat” on
page 101.
Loading Dealer Information
VisionPRO thermostats can display the dealer's contact
information on the screen, making it easy for users to contact
them for post-sale support and service. After saving the
dealer's contact information to a microSD card, the dealer can
upload this information to the VisionPRO thermostat using the
microSD port.
1. In a web browser on your computer, go to
http://thermostatsetup.honeywell.com
2. Enter your dealer information into the text boxes pro-
vided on the web site.
3. Connect a microSD card to a USB adapter. Then con-
nect the USB adapter to your computer. See Fig. 268.
4. Download the dealer information file to the microSD USB
adapter by clicking the indicated link on the web site.
5. When the File Download box opens, click Save.
Scroll to see:
Call XYZ for
Indoor Quality
Solutions
Computer
USB Adapter
MicroSD Card