Owner's Manual

VISIONPRO
®
8000 WITH REDLINK™
68-0312—03 102
COMMERCIAL FEATURES
The thermostat can be setup for residential or light commercial
applications (ISU 101). When the thermostat is setup for
commercial, the thermostat meets commercial code, Title 24
and provides the following features:
• Commercial language (occupied and unoccupied)
• Temporary override (permanent hold is not allowed)
• Temporary override duration is limited to the amount set by
the installer
• Guide me through scheduling
• Adjustable ramp rates
• 365 holiday schedule
• Schedule up to 25 custom events
• Initiate occupancy
• Remote setback using an occupancy sensor
• Economizer or Time of Day output
• Pre-occupancy purge
• Additional dehumidification control options
Fig. 272.
Overriding Schedules: Commercial
Use
Touch  or to adjust the temperature. It will be maintained
until the hold time you set.
• To change the hold time, touch the Hold Until arrow buttons.
This time can be adjusted up to the maximum time set by
the installer.
Fig. 273.
• Touch Override to use a pre-set occupied temperature if a
person uses the room during an unoccupied period. The
new temperature will be maintained for 1 hour and can be
adjusted up to the maximum time set by the installer.
Fig. 274.
The programmed schedule will resume when the override timer
expires. Touch Cancel Hold at any time to resume the program
schedule.
Setting Holiday/Event Schedules:
Commercial Use
This feature helps you conserve energy when the workplace is
unoccupied for special events and holidays.
1. Touch MENU.
Fig. 275.
2. Select Holiday Schedule.
Fig. 276.
3. Select the item you want to schedule and touch Next for
further scheduling details.
• US and Canadian Holiday options let you select from
a list of holidays commonly observed in each country.
• Custom Events lets you set up other days for special
schedules.
Fig. 277.
MCR34169
MCR34106
MCR34100
MCR34113
Holiday Schedule
Holiday Mode
MCR34114
Custom Events
US Holidays