User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installation for MS-DOS
Introduction
D-2 WaveLAN IEEE 802.11 PC Card User’s Guide
WaveLAN Card via any PC Card slot that is controlled by an Intel
82365 PCIC or computers that support Card & Socket Services.
Installation Overview D
To install the IEEE 802.11 WaveLAN PC Card in an MS-DOS
environment, you will need to:
1. Copy the WaveLAN software manually to the hard disk of your
computer.
2. Setup the WaveCAD program.
3. Install the Network Client Software for your network operating
system.
4. Setup the WaveLAN configuration parameters.
5. Restart the computer to verify that the WaveCAD executes
successfully and the network driver is loaded.
To setup the various configuration parameters, you may need to
edit a number of system files. You can use any MS-DOS line editor
to edit these files, for example the MS-DOS ‘
EDIT‘ command.
Example DOS commands:
c:\
edit config.sys