User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installation for MS-DOS
Setup the WaveCAD Program
D-6 WaveLAN IEEE 802.11 PC Card User’s Guide
Alternatively you can use the Microsoft Diagnostics program
(
MSD.EXE) to determine the available values. For more information
about Microsoft diagnostics, please refer to the documentation that
came with your MS-DOS operating system.
You can use any MS-DOS line editor to edit the
CONFIG.SYS file.
The format of the device line is as follows:
DEVICE = [path name]wvlancad.sys /m=xxxx /b=xxxx /i=nn
For example, if your device line looks as follows:
DEVICE = c:\wavelan\wavecad\wvlancad.sys /m=d100 /b=0340 /i=11
The WaveCAD will be programmed to use:
■ Memory Address d100 - dFFF
■ I/O Port Address 0340H and
■ IRQ 11