User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installation for MS-DOS
Setup the WaveLAN Parameters
D-24 WaveLAN IEEE 802.11 PC Card User’s Guide
■ Alternatively type the following command lines at the MS-DOS
prompt to display help for the WaveLAN Packet Driver.
cd\wavelan\drivers\packet
wvlan42.com h
Table D-4 Packet Driver Specific Parameters
Driver_Class A specific “Packet Driver” parameter that controls
the frame format.
Valid Values:
1. DIX Ethernet (v2.0) frame format (Default)
11. IEEE 802.3 with 802.2 headers frame format.
Novell_Flag Enables support the Novell IPX 802.3 frame format.
Valid Values:
Y. C
onvert all 802.3 type packets to 8137 type
packets.
N. No, do not use the NovellFlag (=default)
Packet_Interrupt This parameter identifies the software interrupt
number that the Packet Driver should use.
Valid Values (hexadecimal):
■ 0x60 (default)
■ 0x70
Enter the value without the 0x prefix.