User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installing in Apple Macintosh
Installing the WaveLAN Driver
WaveLAN IEEE 802.11 PC Card User’s Guide E-3
Optionally you can install and enable both networking protocols.
For more information about installing protocols, please consult the
“balloon help” and User’s Manual that came with your Apple
PowerBook.
To finish the installation of the WaveLAN drivers and networking
protocols, please restart your Apple PowerBook computer.
Enabling your WaveLAN Card E
Insert the WaveLAN PC Card into your computer. Once your
computer has restarted, you will see the WaveLAN/IEEE icon
appear on the desktop of your Apple PowerBook.
NOTE:
If this icon is not displayed, verify if the PC Card is properly
inserted into the PC Card slot of your Apple PowerBook.
To enable your WaveLAN connection, you will need to configure
the AppleTalk protocol to use the WaveLAN card for its network
communication.
1. Double-click the WaveLAN/IEEE icon to launch the AppleTalk
installation.
2. In the top side of the AppleTalk window, open the pull-down list
of the item “Connect via:”
3. Select the item WaveLAN/IEEE as pictured in Figure E-1.