User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installing in Apple Macintosh
Removing the WaveLAN Driver
E-10 WaveLAN IEEE 802.11 PC Card User’s Guide
Removing the WaveLAN Driver E
If you wish or need to remove previously installed WaveLAN
drivers, you can do so using the WaveLAN Installer program.
Removing previously drivers is mandatory if you wish to:
■ Upgrade a driver
■ Change the type of driver (e.g. migrate from “Apple Classic” to
Apple “Open Transport”.
To remove the drivers, proceed as follows:
1. Insert the WaveLAN diskette for the MAC operating system
into your Apple PowerBook.
2. Double-click the diskette icon on the “desktop” of your
computer, to display the contents of this WaveLAN diskette.
3. Now double-click the file called “WaveLAN Installer” to start
the installation program.
4. In the welcome window click the button “Continue” to proceed.
5. From the list of options select “Custom Remove”.
If you have any applications open during the WaveLAN
installation process, you will be prompted to close these
applications.
■ Click “No” to abort the process, or
■ Click “Continue” to proceed and have the MAC operating
system close all the open applications.
6. Follow the instructions as they appear on your screen and
restart your computer.