User Manual
Table Of Contents
- ChapterTitleList - Technical Support
- ChapterTitleList - Regulatory Information
- ChapterTitleList - Information to the User
- ChapterTitleList - Table of Contents
- ChapterTitle - About WaveLAN/IEEE
- ChapterTitle - Hardware Installation
- ChapterTitle - Installation for Windows
- ChapterTitle - Advanced WaveLAN Parameters
- ChapterTitle - Monitoring WaveLAN Performance
- ChapterTitle - WaveLAN Security Options
- ChapterTitle - Card Specifications
- ChapterTitle - Troubleshooting
- ChapterTitle - Installing in Windows CE
- ChapterTitle - Installation for MS-DOS
- ChapterTitle - Installing in Apple Macintosh
- ChapterTitle - Warranty Repair Card
- ChapterTitleList - List of Figures
- ChapterTitleList - List of Tables
- ChapterTitleList - Index
Installation for Windows
Installing the Miniport Driver
WaveLAN/IEEE Turbo 11 Mb PC Card 3-9
Installing the Miniport Driver 3
If your Windows operating system automatically detected your
hardware, it will prompt you to select a driver from a list, or install
the driver from a “Disk provided by Hardware Manufacturer”.
Some Windows operating systems may prompt you to select the
type of network adapter first, to select the appropriate driver (see
Figure 3-2).
Figure 3-2 Select WaveLAN Adapter Type
This is usually the case when:
■ Your computer came with a factory-installed version of
Windows 95 (usually referred to as Windows 95 OSR2).
■ Your computer runs the Windows NT operating system
(version 3.51 or 4.0), and you performed the steps as
described in “Getting Started in Windows NT” on page 3-5.
NOTE:
To make sure you install the latest available driver, always
select the “Disk provided by Hardware Manufacturer” or