User Manual

Installation for Windows
Installing the Miniport Driver
3-10 WaveLAN/IEEE Turbo 11 Mb PC Card
the “Have Disk” option, to install the driver from the
WaveLAN Software CD-ROM that came with your
WaveLAN card.
Alternatively, you can use the “Browse” option to navigate
to the directory where you stored the set of files that you
downloaded from the WaveLAN website.
As Windows operating systems differ slightly (see “What You Need
to Know” on page 3-2), some of the screens pictured in this
chapter may look different from the actual display on your screen.
However, the parameter settings for your WaveLAN IEEE 802.11
PC Card will be similar for all Windows operating systems.
1. In the “Select Network Adapter” window, click the “Have Disk”
button.
2. Ensure that the WaveLAN Software CD-ROM has been
inserted into your computer, and click the button to
proceed.
When you downloaded the latest driver files from the
WaveLAN website:
■ Use the “Browse” option on Windows 95/98 systems, to
navigate to the harddisk drive and folder where you saved
the driver files.
■ Windows NT systems will not allow you to “browse” for a
harddisk folder as an alternative to a floppy disk. For such
systems you will need to extract the downloaded files first,
and copy the extracted files to a diskette.
Windows will start copying files from your Windows installation
disks or CD-ROM and the WaveLAN Software CD-ROM.
3. If the system prompts you to identify the location of files (see
Figure 3-3 on page 3-11), enter the correct drive and directory,
and click the button to proceed.