User Manual

Installation for Windows
Finishing the WaveLAN Installation
3-20 WaveLAN/IEEE Turbo 11 Mb PC Card
Finishing the WaveLAN Installation 3
When you have finished “Setting the WaveLAN Parameters”, click
the button to proceed with the installation process. Windows
will finish building the driver configuration database and copy some
files from your CD-ROM or diskette to your computer’s hard disk.
If the Windows operating system prompts you to identify the
location of the Windows files, specify the drive and directory of the
Windows Installation CD-ROM or diskettes (see also page 3-11).
When Windows has finished the copying of files, it will prompt you
to restart your computer.
1. Remove the WaveLAN software diskette from drive A:\
2. Click the button to restart your computer.
Figure 3-7 Finished Setting up the Hardware
After Restarting Your Computer 3
After you have restarted your computer, the Windows operating
system should detect the WaveLAN IEEE 802.11 PC Card (you
can hear the two-tone sound of the PC Card Socket Controller).
Windows will load the WaveLAN IEEE 802.11 Miniport driver and
will open with a dialog box that enables you to enter a user name
and password. The password you enter here will be the one used
to log into the Windows Network Neighborhood.