User Manual

WaveLAN IEEE 802.11 PC Card User’s Guide 5-1
5
Monitoring WaveLAN
Performance
About WaveMANAGER/CLIENT 5
The WaveMANAGER/CLIENT IEEE program is a diagnostic tool
for WaveLAN wireless networks that you can use to:
■ Verify the quality of wireless communications between your
WaveLAN station and the WavePOINT-II access point.
■ Display information about the configuration settings of your
WaveLAN station and the WavePOINT-II access point.
■ Perform a site verification to determine or optimize placement
of your WaveLAN station and WavePOINT-II access points.
The WaveMANAGER/CLIENT IEEE tool runs only on WaveLAN
equipped computers that run one of the following operating
systems:
■ Windows 95 or Windows 98
■ Windows NT (version 4.0 or higher)
NOTE:
The WaveMANAGER/CLIENT IEEE tool shipped with your
WaveLAN IEEE 802.11 adapter does not work with
previous generation WaveLAN devices. To monitor
networks that use WaveLAN/PCMCIA or WaveLAN/ISA,
you are advised to install the WaveMANAGER/CLIENT
that was shipped with those products.