User's Manual

14 sensing.honeywell.com
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE 1
32309669
6 | LCD/MENU/MODE OPERATION
6.1 | Start-up or Re-start Sequence Mode
(EtherNet/IP™ Active Connection and
Power Supplied to WMPR)
6.1.1 | Zero Switches or Sensors Paired
to WMPR
Zero switches/sensors paired to the WMPR: EtherNet/IP™ ac-
tive connection is made and then applying power to the WMPR will
result in the LCD Menu sequencing through the following displays
before entering the Main Menu.
Figure 4. Honeywell Splash Screen (momentarily
shown)
EtherNet/MAC ID screen appears (see Figure 5). (Record the MAC
ID, IP Address, and then touch the “Next” function button to move
to the Main Menu).
Figure 5. Ethernet/IP ™ MAC ID & IP Address
Figure 6. Main Menu
6.1.2 | One or More Switches or Sensors Paired
to WMPR
One or more switches/sensors paired to the WMPR: EtherNet/
IP™ active connection is made and then applying power to the
WMPR will result in the LCD Menu scrolling thru the following dis-
plays before entering the Main Menu:
Figure 7. Honeywell Splash Screen (momentarily
shown)
System start-up screen (see Figure 8) will take up to two (2) minutes
before displaying EtherNet/IP MAC ID & IP address (see Figure 9)
screen.
Figure 8. System Start Up