User's Manual
Honeywell Sensing and Productivity Solutions 19
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE 1
32309669
6.7 | Receiver Detail
Figure 22. Receiver Detail Menu
The RECEIVER DETAIL (see Figure 22) can be accessed by touch-
ing the “RECEIVER DETAIL” function button as displayed in the
Action Menu (see Figure 15). Once you are in the RECEIVER DETAIL
you can choose between several different modes.
A description of the modes are as follows:
CHANNEL: The Channel displays which channel in the 2.4 MHz
range that the WMPR is operating at.
PAN ID: The PAN ID displays the Personal Area Network identica-
tion number assigned to the WMPR.
RECEIVER INFO: The Receiver Information contains the following
detail about the WMPR (see Figure 23).
Table 19. Receiver Detail Display & Indication, Screen 1
Display Indication
P/N Part Number of WMPR
Radio FW Rev Firmware version in WMPR radio
Transmit power
(Power level
setting)
Transmit power of the WMPR:
North America = 11 dBm; International = 6 dBm
MAC MAC ID of WMPR radio
Figure 23. Receiver Information, Screen 1
Table 20. Receiver Information, Screen 2
Display Indication
WMPR REV Firmware version of WMPR main processor
IP Address Internet Protocol address
Enternet IP/
MAC ID
EtherNet/IP™ Media Access Control address
Figure 24. Receiver Information, Screen 2
6.8 | Pair Mode
Figure 25. Pair Mode
The PAIR MODE (see Figure 25) can be accessed by touching the
“PAIR” function button as displayed in the Conguration Menu (see
Figure 20). Once you are in the PAIR MODE you can choose any
of the 14 node numbers to pair by scrolling “Up” or “Down” to the
desired Node number. The screen will display the next sequential
Node# available to Pair and if a chosen node has already been
paired the screen will display “Node Paired”. Follow the Pairing Pro-
cedure below to properly Pair a Node to the WMPR: