User's Manual

Honeywell Sensing and Productivity Solutions 23
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE 1
32309669
Figure 40. Node LCD Time - Updated LCD Time Dis-
played (i.e., 5s, Off 5s)
Note: If the particular Node # that you are trying to update does not
have an LCD display, the screen will display “Node LCD N/A”.
6.12 | Factory Reset Receiver Mode
Figure 41. Factory Reset Receiver Mode
The Factory Reset Mode (see Figure 41) can be accessed by touch-
ing the “FACTORY RESET RCVR” function button as displayed in
the Conguration Menu (see Figure 21). The Factory Reset Mode
will purge all nodes from the WMPR and reset to Factory settings.
Touching the “Start” function button will initiate the Factory Reset
process and lead to the display in Figure 42 momentarily before
displaying the Receiver information; Figure 43:
Figure 42. Reset of Receiver In-Process
Figure 43. Network Start Notice
You must touch the “HOME” function button to return to the CON-
FIGURATION MENU.