User's Manual

Honeywell Sensing and Productivity Solutions 25
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE 1
32309669
Table 23. Country Code Use “B” Antenna/Cable/Mounting Options
ANTENNAS FOR USE IN COUNTRY CODE B
(Note: all columns are independent of each other)
Antenna Type
Code (antenna pro-
vided with product)
Direct-Mount
Antennas (allowed
for use)
Remote Mount
Antennas (al-
lowed for use)
Magnetic Remote
Mount Assemblies/
Antennas
WAMM100RSP-005
(allowed for use)
Extension Cable As-
semblies/Antennas
for Remote Mount
WCA200RSJRSP-010
(allowed for use)
Extension Cable As-
semblies/Antennas
for Remote Mount
WCA200RSJRSP-005
WCA200RSJRSP-010
WCA200RSJRSP-015
WCA200RSJRSP-020
(allowed for use)
00 WAN01RSP WAN03RSP WAN01RSP WAN01RSP WAN01RSP
02 WAN02RSP WAN09RSP WAN02RSP WAN02RSP WAN02RSP
WAN10RSP WAN04RSP WAN03RSP
WAN09RSP
WAN10RSP
WAN11RSP
Note:
Direct mount: Antennas have an RP-SMA plug that connects directly to the WMPR RP-SMA jack
Remote mount: Remote mount antenna uses a cable with a RP-SMA plug that connects directly to the WMPR RP-SMA jack
, ATTENTION
If using the WMPR in a portable application (for example, the WMPR is used in a handheld device and the antenna is less
than 20 cm from the human body when the device is in operation): The integrator is responsible for passing additional SAR
(Specific Absorption Rate) testing based on FCC rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields, OET Bulletin and Supplement C. The testing results will be submitted to the FCC for approval prior to
selling the integrated unit. The required SAR testing measures emissions from the module and how they affect the person.
Note for Section 7.1, Tables 22 and 23:
1. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this document,
and having a maximum gain of 9 dBi. Antenna types not included in this list or having a gain greater than 9 dBi are strictly prohibited
for use with this device. The required antenna impedance is 50 Ohm.