User's Manual
38 sensing.honeywell.com
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE 1
32309669
11 | CHOOSING A WMPR SERIES
CATALOG LISTING
This section is intended to be used for identifying a catalog listing from the WMPR nomenclature to determine suitability in a particular
application.
Figure 60. Limitless™ WMPR Nomenclature
WMPR
Receiver type
A
Country use
code
A
B
US,
Canada
All other
approved
countries
WMPR Series
Multi-Protocol
Receiver
1
GEN code
A
RF code
1
Version 1
A
2.4 GHz;
IEEE 802.15.4
00
02
00
No antenna; RP-SMA
connector jack
2.2 dBi omni w/receiver
mount; tilt/swivel
Antenna
type code
1
Output code
1
EtherNet/IP™
A
Seal code
A
IP20
1
Mounting
code
1
2
Mounting
plate, epoxy
coated CRS
DIN
bracket,
aluminum
Specials
The following procedure refers to appropriate sections in this
manual to determine/build a WMPR listing.
1. Determine the country the product will be used in. Review
Section 2.1 (Intended Country Usage) to determine the Country
Use Code (A or B) in relation to the country the WMPR will be
used in.
2. Determine the antennas and/or Antenna Type Codes allowable
for use. Review Section 2 (ANTENNA OPTIONS ALLOWED
PER COUNTRY USE CODE) to determine the antennas/cables
allowed for use in a particular country (based on the Country
Use Code determined in Step 1). Some antenna/cable options
can be ordered with the WMPR and some are ordered sepa-
rately. If an antenna is ordered separately, choose Antenna Type
Code 00 (see product nomenclature).
3. Review Section 8.4 (Overview of Antenna Options) against
the antenna list identied in Step 2. Initially, narrow options by
choosing a desired antenna that can be used indoor/outdoor or
indoor/limited outdoor exposure.
4. Review Sections 8.2 & 8.3 (Omni-directional Antenna Design &
Antenna Mounting and Considerations) for a background of an-
tenna design, considerations, warnings, etc. Choose a possible
direct- or remote-mount antenna.
5. Section 8.4 helps to determine the antenna material most
suitable for use based on the application environment. Also
consider the effects of lightning or RF Interference (if applica-
ble).
12 | QUICK START UP AND
INSTALLATION
There are many sections in this manual that describe the consider-
ation, concerns, specications, etc. with respect to country of use,
antenna choices, environmental effects, etc. The following sections
are useful for initially “starting up” the WMPR and associated Limit-
less™ input.
, ATTENTION
Ensure that the country the product is being used in appears
in the chart along with the correct Country Use Code on
the WMPR label. Review Section 2.1 and 7.1 in this manual.
If required, contact Honeywell before use of the WMPR in
Countries not listed in Table 3 thru 6 in Section 2.1.
Table 26. Suggested Start-Up Sections to Review
Suggested Start-up Sections to Review Section
Electrical Congurations/Connections 5.1 to 5.3
Start-up or Restart Sequence Mode 6.1
Main Menu > Action Menu > Pair Mode 6.8
Antenna Connection, Styles, and Mounting Options 8.5.3
Antenna Adjustment Considerations 8.5.4
Antenna Environmental Usage/Concerns 8.6
Choosing an Antenna Gain (dBi) with Acceptable
Fade-Margin
8.7
WMPR mounting 9