User's Manual

Honeywell Sensing and Productivity Solutions 1
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
ISSUE 1
32309669
1 | PRODUCT DESCRIPTION
1.1 | General
The Limitless™ Series uses the latest commercial off-the-
shelf wireless technology that can be used in a wide variety
of applications. This is especially beneficial for remote
monitoring applications where previous wiring installation or
wire maintenance was not physically possible or economically
feasible. This document will provide installation instructions to
properly install a Limitless™ Wireless Multi-Protocol Receiver
WMPR, as well as a detailed understanding of its functions.
1.2 | Principle of Operation
A Limitless™ input sends an RF signal to the WMPR when the
Limitless™ digital or analog input changes state. There may be
up to 14 Limitless™ digital or analog inputs that communicate
and indicate their state to a single WMPR. The WMPR receiver
is menu driven through the use of function buttons and a easy
to read LCD display. The menu allows you to see status of the
nodes, configure nodes, and update receiver functionality. A
change of state of a Limitless ™ input will cause a corresponding
change in output of the particular node to be output via an
EtherNet/IP™ output. The WMPR indicates low battery conditions,
lost RF links, as well as other diagnostic and functional
operations described in further detail throughout this manual.
Intended Audience
This guide is intended for people who are responsible for plan-
ning, configuring, administering, and operating the Limitless™
Network.
Prerequisite Skills
It is assumed that you are familiar with the operation of Limit-
less™ Networks.
About this Document
This document outlines professional installation requirements for
the Limitless™ Receiver, WMPR Series. Professional installation
is required to comply with certification agency and legal require-
ments. This document must be adhered to for all installations of
the Limitless™ Receiver, WMPR Series.
These devices are not intended for critical control where there is
a single point of failure or where single points of failure result in
unsafe conditions. As with any process control solution, it is the
end users’ responsibility to weigh the risks and benefits to deter-
mine if the products used are the right match for the application
based on security, safety, regulations, and performance.
Revision Information
Document name Document ID Publication
Date
Installation and Technical
Manual for the Limitless™
Receiver, WMPR Series
32309669 July 2015
New 32309669
Issue 1
July 2015
References
The following list identifies all documents that may be sources of
reference for material discussed in this publication.
Document title Document No.
WMPR3000700100100.eds Contact Honeywell
Limitless™ WMPR Series Wireless Multi-Proto-
col Receiver EtherNet/IP™ Object Model
32308916