User's Manual
Table Of Contents
- Dolphin® 6100 Mobile Computer User's Guide
- Agency Approvals
- Getting Started
- Terminal Hardware Overview
- Standard Terminal Configurations
- Front Panel Features
- Display Backlight
- Keyboard Backlight
- Using Screen Protectors
- Back Panel Features
- Left Side Panel Features
- Right Side Panel Features
- Top Panel Features
- Bottom Panel Features
- Dolphin Peripherals/Accessories for the 6100
- Dolphin USB Communication Cable
- Battery Power
- Resetting the Terminal
- Suspend Mode
- Changing the Memory Allocation
- Care and Cleaning of the Dolphin Terminal
- Using the Keyboard
- Using the Image Engine
- Communication
- Bluetooth Manager
- Dolphin HomeBase/eBase Device
- Dolphin QuadCharger Device
- Customer Support
3 - 6
6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but
firmly. Use the card as necessary to smooth out any air pockets or bumps after application.
7. Press the Power key to wake the terminal and check the touch panel with the stylus.
8. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.
9. Press the Power key to put the terminal back in suspend mode.
10. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth.
11. Press the Power key to wake the terminal again.