User's Manual
Table Of Contents
- Dolphin™ 6110 Mobile Computer User's Guide
- Agency Approvals
- Getting Started
- Hardware Overview
- Standard Terminal Configurations
- Dolphin Peripherals/Accessories for the Dolphin 6110
- USB Communication Cable for the Dolphin 6110
- Front Panel Features
- Using the Touch Panel
- Back Panel Features
- Left Side Panel Features
- Right Side Panel Features
- Top Panel Features
- Bottom Panel Features
- Battery Power
- Hardware Maintenance
- Dolphin 6110 Technical Specifications
- Using the Keypad
- Using the Image Engine
- Using the Laser Engine
- System Settings
- Communication
- Working with the Bluetooth Radio
- Dolphin HomeBase (Model 6100-HB)/eBase (Model 6100-EHB) Device
- Dolphin 6110 Net Base Device (Model 6100-NB)
- Dolphin QuadCharger Device
- Customer Support
13 - 3
3. When the Status LED turns green, the battery in the slot has completed charging.
Recommendations for Storing Batteries
To maintain top performance from batteries, follow these storage guidelines:
• Avoid storing batteries outside of the specified temperature range of -4 to 104°F (-20 to 40°C) or in
extremely high humidity.
• For prolonged storage, it is recommended that the battery be at a 40% - 50% charge level, be removed
from the device, and stored in a controlled temperature environment. Following these
recommendations will maximize battery life.
Troubleshooting
If you encounter problems with the charger, refer to chart below for possible solutions. If problems persist,
contact Product Service and Repair (see page 13-1).
Problem Issue
The Status LED does not come on
when I insert a battery pack into a
slot.
Check the power connections to the device; make sure the battery
pack is properly seated.
Preliminary 2013-09-16