User's Manual

11 - 4 Rev (a) 01
5/29/08
Dolphin® 7600II Mobile Computer User’s
Guide–Preliminary
Mounting the QuadCharger Device
The QuadCharger device should be mounted on a dry, stable surface such as a desktop or workbench,
or a flat, vertical surface such as a wall.
Mounting Location
When choosing a location for the QuadCharger device:
• Keep in mind that the mounting location must allow users easy access to power switch and power
connector.
• Do NOT place the QuadCharger device in an enclosed space because restricted air flow can cause the
temperature to elevate, which can effect charging. For more information, see Battery Charging on page
11-3.
Mounting Process
To mount the QuadCharger device, slide the DIN Rail into the slot on the bottom panel. Then, using the
appropriate nuts and bolts, secure the DIN rail to the desk or wall.
Bottom Panel Mounting Dimensions
DIN Rail Dimensions
Mounting Guidelines
1. Before you begin, make sure you have two screws that are size #5–diameter measurement of 0.125
in. (3.18 mm).
11 in. (278.93 mm.)
6.17 in. (156.8 mm.)
.99 in.
(25.2 mm.)
.99 in. (25.2 mm.)
.13 in. (3.4 mm.)
1.17 in.
(29.7 mm.)
1.42 in.
(36 mm.)
4.78 in.
(121.4
mm.)
1.38 in.
(35 mm.)
.25 in.
(6.3
mm.)
.98 in. (25 mm.)
.7 in. (17.8 mm.)
1 in.
(27mm.)
.14 in.
(3.6 mm.)
.04 in. (1 mm.)