User's Manual

Dolphin® 7600 Mobile Computer
User’s Guide–Preliminary
Rev (b): Preliminary
9/29/2008
9 - 5
Charging the Main Battery
The HomeBase powers the terminal and fully charges its main battery
pack in less than four hours.
As battery packs charge, the charging circuitry follows the two-step
charging process (CC-CV) that is recommended for Li-Ion batteries.
The process monitors changes in temperature, current, and voltage.
Inserting a Terminal
1. Install the battery pack in the terminal; see Install the Main Battery
on page 2-1.
2. Power the Dolphin HomeBase device; see Powering the
HomeBase Device on page 9-4.
3. Slide the terminal into the terminal well until the Dock LED lights
green to indicate that the terminal is properly seated.
4. The battery pack begins charging.
Checking Battery Power
To check battery power while the terminal is operating,
tap Start > Settings > System tab > Power .