User's Manual

Dolphin® 7600 Mobile Computer
User’s Guide–Preliminary
Rev (b): Preliminary
9/29/2008
10 - 5
Bottom Panel Mounting Dimensions
DIN Rail Dimensions
Mounting Guidelines
1. Before you begin, make sure you have two screws that are size #5–diameter measurement of 0.125
in. (3.18 mm).
2. Drill two holes into the wall, using the slots of the DIN Rail to locate. To ensure stability, holes should
be located at least 4 inches (101.6mm) apart.
3. Insert a screw into each hole. The screw heads should be flush with the surface of the DIN rail,
11 in. (278.93 mm.)
6.17 in. (156.8 mm.)
.99 in.
(25.2 mm.)
.99 in. (25.2 mm.)
.13 in. (3.4 mm.)
1.17 in.
(29.7 mm.)
1.42 in.
(36 mm.)
4.78 in.
(121.4
mm.)
1.38 in.
(35 mm.)
.25 in.
(6.3
mm.)
.98 in. (25 mm.)
.7 in. (17.8 mm.)
1 in.
(27mm.)
.14 in.
(3.6 mm.)
.04 in. (1 mm.)