User's Manual
Table Of Contents
- Dolphin® 7600 Mobile Computer
- Agency Approvals
- Getting Started
- Hardware Overview
- Using the Keyboards
- Using the Image Engine
- System Settings
- Connecting the Terminal
- Working with the Bluetooth Radio
- Dolphin HomeBase Device
- Dolphin QuadCharger Device
- Dolphin Mobile Mount
- Technical Specifications
- Customer Support
Dolphin® 7600 Mobile Computer
User’s Guide–Preliminary
Rev (b): Preliminary
9/29/2008
6 - 13
Remove Programs
Remove Programs enables you to remove programs installed on the terminal. Use this setting to
troubleshoot when you receive messages that the terminal is out of memory. The programs removed are
removed from RAM memory.
Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall)
will re-install after the next hard reset. For information about the hard reset process, see Hard Reset (Cold
Boot) on page 3-25.
1. Tap Remove Programs. In the list, select the program you want to remove.
2. Tap Remove. The following message appears:
3. Tap Yes. Wait while the program is removed.
4. Verify that the program no longer appears in the list.