User's Manual

7 - 6 Rev (b): Preliminary
9/29/2008
Dolphin® 7600 Mobile Computer
User’s Guide–Preliminary
Dolphin Wireless Manager
The Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-board
radios. Each radio has its own configuration program and the Dolphin Wireless Manager also provides
shortcuts to the configuration utilities for each radio.
There are two radio options: 802.11b/g and Bluetooth.
1. 802.11b/g The WLAN radio is configured in the Honeywell WLAN Secure Wireless Client (SWC).
Refer to the Honeywell WLAN SWC User’s Guide, which is available for download from the
7600 product page at www.honeywell.com/aidc.
2. Bluetooth See Working with the Bluetooth Radio on page 8-1.
Dolphin Wireless Manager Window
Tap Start > Settings > Connections tab > Dolphin Wireless Manager .
Each rectangle represents a radio.
Enabling the Radios
1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager .
2. Tap anywhere inside the rectangle or the OFF button inside the rectangle. The radio begins
activating.
3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON.
Note: If applicable, information about the radio appears in the rectangle.
If a rectangle is grayed-out,
then the radio is not installed
on the terminal.
These buttons show you the
state of the radio.