User's Manual
Table Of Contents
- Dolphin® 7600 Mobile Computer
- Agency Approvals
- Getting Started
- Hardware Overview
- Using the Keyboards
- Using the Image Engine
- System Settings
- Connecting the Terminal
- Working with the Bluetooth Radio
- Dolphin HomeBase Device
- Dolphin QuadCharger Device
- Dolphin Mobile Mount
- Technical Specifications
- Customer Support
Dolphin® 7600 Mobile Computer
User’s Guide–Preliminary
Rev (b): Preliminary
9/29/2008
9 - 3
Back Panel
Pivot Connector
This pivoting connector swivels 90 degrees. The default position is horizontal, with the
connectors facing straight out the back panel. The pivot connector stops in both the horizontal
and vertical positions, with the connectors facing out the bottom panel.
DC Power Jack
Connect the power cable to this power jack; see Powering the HomeBase Device on page 9-4.
USB Port
This USB port is full-speed (v1.1). Using the USB cable, you can connect the HomeBase
device to a USB-compliant device to facilitate USB communication to and from the terminal.
USB communication occurs through Microsoft ActiveSync (v.4.5 or higher). For more
information about ActiveSync setup, see ActiveSync Communication on page 3-18.
Note: You can also purchase a serial HomeBase with a standard DB9 connector for RS-232
communication.
DC Power Jack
USB Port
Pivot Connector