User's Manual

DRAFT COPY 11/11/11
12 - 7
Mounting the HomeBase
Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure
to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal
while it is in the base. When choosing a mounting location, bear in mind that the location must allow
users' easy access to the Auxiliary Battery Well and the back panel of the HomeBase where the USB
port and the power jack are located.
Optional Hardware Mount
On the bottom of the HomeBase there are four mounting holes with a maximum depth of 7 mm that can
b
e used to secure the base to a horizontal surface such as a desktop or workbench using M3 self tap-
ping screws.
Optional Mounting Holes for M3
self tapping screws, Qty. 4.
Maximum thread depth of 7 mm.
101 mm
[3.98 in.]
98 mm
[3.86 in.]
C
L
90 mm
[3.54 in.]