User's Manual

DRAFT COPY 11/11/11
14 - 3
Back Panel and Mounting Brackets
Ball Joint
Pivot Bracke t
Base
Mounting Bracket
Turnscrew
Ball Joint
Ball Joints
There are two ball joints: one that is attached to back of the base and one on the mounting
bracket. Both ball joints are inserted into the bracket and secured to mount the base.
Pivot Bracket
The bracket contains the turnscrew and two slots. Ball joints are inserted into each slot and
secured with the turnscrew.
Turnscrew
The turnscrew is located on the side of the pivot bracket. Rotate the turnscrew to secure or
loosen the ball joint slots.
Mounting Bracket
The mounting bracket is what you attach to the mounting surface. It is comprised of a ball joint
and flat disk. The disk contains drill holes you use to secure the base to the mounting surface.
Mounting
The adjustable mounting bracket holds the terminal securely in place and gives the user a variety of
options for mounting the base.
Safety Precautions
Honeywell is not responsible for any damages caused to you, your vehicle, or other individuals due to the
installation of the Dolphin Mobile mount.
Follow these safety precautions when mounting the mobile base:
Never drill into a surface in your vehicle without first consulting a mobile installation professional
!
experienced with your vehicle type to avoid damaging the vehicle's safety features, gas tank, elec-
t
rical system or other sensitive vehicle components.