User's Manual

DRAFT COPY 11/11/11

16 - 7

Bottom Panel

DIN Rail Slot

Rubber Feet, Qty. 8

Optional Mounting Holes for M3 self

apping screws, Qty. 4. Maximum

thread depth of 7 mm.

Desk Mounting

The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.

Hardware Required

• 3/16 in. dia x 5/8 in. long pan head screw

• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick

• 3/16 in. dia nut

Installing the DIN Rail

1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.

2. Turn the base and DIN Rail right side up.