System Tab The System Settings tab controls logging and the port manger timeout period. Field Description Log Level These settings control the detail of the log messages generated by the Client. Each level is cumulative. By default, all errors, warnings, and information events are logged. Each entry records a severity code (of one [debug message] to four [error] asterisks), a time stamp, and a message. • Errors - only the most severe conditions are logged. • Warnings - less severe conditions are logged.
Server Tab The Server identity tab defines the credentials the client uses to authenticate the server during TLS/TTLS/PEAP authentication message exchange. The Client uses this information to verify that the Client is communicating with a trusted server. Field Description Do not validate server certificate chain If this option is selected, the server certificate received during the TLS/TTLS/PEAP message exchange is not validated.
Wireless Networks Tab Field Description Available Networks Displays the networks the terminal recognizes as available to connect to. When the Client is first installed, there are no entries in the Available Networks list. Scan Displays a list of networks broadcasting their availability. You can also attach to networks who are not broadcasting. Move to Configured Activates after Scan has been tapped and the available networks have been retrieved.
Protocol Tab The Protocol tab configures parameters that apply to all the networks the selected port connects to. Field Description Protocol Settings These are the timer intervals and retry settings defined in the 802.1X standard. They determine how long the supplicant state machine will wait in a given state. These parameters shouldn’t be modified without an understanding of the supplicant state machine. For more information about the supplicant state machine, obtain its 802.1X protocol specification.
Configuring a Network Profile To configure a network profile, on the main screen, tap and hold on the port, tap Configure, then tap Add. The Network Profile screen opens displaying the Profile Info tab. Note: The settings on these tab windows are interrelated. This means that selecting one may disable access to others.
Profile Info Tab Field Description Network Profile Enter the name of this record. This is the name that appears in the Configured Networks list and, by default, is the same as the broadcast SSID. Note that there is nothing special about the name "default". You could configure any other record similarly and it would behave the same way. Network Name This is the SSID of the AP. If the AP broadcasts its SSID, then this value may be derived from the Available Networks list.
Field Description Key In this field, enter the WEP key. ASCII: 5 or 13 characters Hexadecimal: 10 or 26 characters. When the key entered is in the correct format, the screen changes to display the type - ASCII or Hexadecimal. Key Index/Transmit Key The Key Index drop-down list contains the available keys. You may enter up to four keys for reception; the Client will try all four to find one that works with the AP. From the drop-down list, select the key to be used for transmission as well.
The Refresh button at the bottom of the screen is used to update the log file while you are reading it. If the file gets too large, old entries are automatically deleted. If you wish to start with a blank file, exit from the Client (so the icon no longer appears at the lower right of the screen) and delete the log file (log8021x) in File Explorer; see Using Find on page 4-11. When you restart the Client, a new log file is created.
4. Tap OK. The certificate is loaded into the correct certificate store. Advice and Workarounds Issue Possible Causes and Solutions The Client will not start on the device with an error message about missing files. Perform a soft reset. The wireless network interface (port) does not appear in the main AEGIS screen. • The license is not valid (If you have entered a time-limited license, is your clock on the device correct?). • Restart the client - on the main screen tap Client > Restart.
Advice and Workarounds Issue Possible Causes and Solutions How do I enable peer-to-peer (ad-hoc) mode to have two clients communicate without an AP? • On the Wireless Networks tab, add a new profile to the Configured Network list. • On the Profile Info tab, give each side the same network name (SSID). • Select Peer-to-Peer Group (ad hoc mode) and Do active scan. • On the WEP management section, select Use key for data encryption and enter an identical key for both clients.
10 Wireless PAN (WPAN) Communications with Bluetooth Overview Dolphin terminals are available with a Bluetooth radio for WPAN (Wireless Personal Area Network) usage. When the Dolphin is first initialized, the *.cab file and module for Bluetooth are installed. Enabling the Bluetooth Radio Before using the radio, make sure that the Bluetooth radio is enabled. When the radio is enabled, the Bluetooth icon appears in the task tray on the Today screen.
1. Tap on the Bluetooth icon on the Today screen. Select Advanced Features then My Bluetooth Device. Note: If you installed OBEX, the menu also lists Transfer via Bluetooth. 2. The My Bluetooth Device screen appears. Tap on the COM Ports tab. 3. As needed, view and/or enable/disable the Bluetooth COM port assignments. Tap OK. You can also disable the IrDA port to free up a port for Bluetooth devices. Tap Start > Settings > Connections tab > IrDA and select Disable IrDA Port.
3. Follow the Bluetooth Device Discovery Wizard to search for Bluetooth devices nearby. When prompted, select the device type you seek. 4. When the search is complete, a screen reports the discovered Bluetooth devices. Check the box next to any device you wish to save information about, (i.e., any devices you wish to connect to). Tap Next. 5. A service discovery phase begins, 5-10 seconds per chosen device. 6. In the next screen, tap Finish.
2. Tap and hold your stylus on the Bluetooth device you want to bond with. In the pop-up menu, select Bond. 3. Alternatively, after selecting a device, tap on the Bond icon. Or tap on Device, then select Bond. 4. The Bluetooth Device Bonding Wizard launches. Follow the wizard to bond with your selected device. 5. As prompted, make sure the Bluetooth device that you want to bond with is in Bondable mode.
6. If the remote device is set up to accept bonding, a Bluetooth Passkey screen appears. To continue bonding, enter the correct passkey and tap Reply. 7. When you have successfully bonded with the other device, tap Finish. View Device Properties Follow these steps to view the properties of an already discovered device. 1. If not open, launch the Bluetooth Devices folder. Tap on the Bluetooth icon on the Today screen. Select Advanced Features then Bluetooth Devices. 2. Select a device.
2. Tap on the tab for the type of device you would like to set a favorite for. If needed, use the arrow buttons to scroll and find the tab you need. Note: Tabs appears only for COM ports you have enabled. To enable a port, refer to the “Assign COM Ports” section earlier in this chapter. 3. To select a favorite device, select Use the favorite selected above. In the drop-down list, select your device. Tap OK. 4.
2. Tap and hold your stylus on the device you wish to delete. In the pop-up menu, select Delete. Turn Radio Transmitter ON/OFF You may want to turn off the radio transmitter to save power or if you are entering an area with radio restrictions (e.g., an airplane). 1. Tap on the Bluetooth icon in the task tray on the Today screen. 2. In the pop-up menu, select Turn Transmitter OFF. 3. The Bluetooth Card radio transmitter shuts off. The Bluetooth icon and menu options becomes gray. 4.
(a) When you tap on Bluetooth ActiveSync, a screen appears that allows you to choose which computer to connect to in your Bluetooth Devices folder. Choose a computer from the list and tap Select, or tap Find to search for another computer. Note: If the computer you want to connect to is not listed, tap Find to begin a search. Proceed as described in Scenario #3 on page 10-8. (b) Your device attempts to connect to your selected computer.
(d) The Connect To screen appears, reporting that it is trying to connect to Wireless ActiveSync. (e) After a successful connection is made, the status screen reports Connected. Now you are ready to synchronize, if desired. Bluetooth LAN Access This section explains how to use the Bluetooth LAN Access feature to quickly and easily connect to a Bluetooth-enabled LAN access point. 1. Tap on the Bluetooth icon. In the pop-up menu, select Bluetooth LAN Access. 2.
(a) When you tap Bluetooth LAN Access, the device automatically tries to connect with your favorite access point. (b) If your LAN requires a passkey, a screen appears, asking for the passkey. Enter the passkey, then tap OK. (c) After a successful connection is made, the status screen reports Connected. (d) Now you are ready to access your LAN for Internet access, files, etc. SCENARIO #3: Your Bluetooth Devices folder has no access points.
OBEX This section explains how to use the OBEX (object exchange) application to trade business cards, contacts or files with another Bluetooth device that supports OBEX. Bluetooth OBEX application supports five operations: • Exchange Business Cards • Send a Contact • Send a File • Browse Remote Device • Receive Contact or File • Enable File Sharing The first four operations - exchange business cards, send a contact, send a file, and browse remote device - are client-oriented.
3. Now you are ready to exchange business cards. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Exchange Business Cards. 4. If your device has no devices in the Bluetooth Devices Folder, then it begins to search for Bluetooth devices nearby. 5. Select the Bluetooth device you wish to exchange business cards with. If the device is not listed, tap Find. 6. Your device begins exchanging business cards.
4. If your device has no devices in the Bluetooth Devices Folder, then it begins to search for Bluetooth devices nearby. 5. Select the Bluetooth device you wish to send the contact(s) to. If the desired device is not listed, tap Find. 6. Your device processes and sends the contact(s). Send a File 1. Make sure the other Bluetooth device can receive a file; that device must support the OBEX Object Push server profile.
4. Select the Bluetooth device you wish to send a file. If the desired device is not listed, tap Find. 5. In the next screen, tap on the file you wish to send. You can use the Folder and Type drop-down menus to search for your file. Also, you can scroll horizontally to view the folder, date, size, type, and location of each file. 6. Your device sends the file. Browse Remote Device The Bluetooth File Explorer lets your device share files with another Bluetooth device.
2. Now you are ready to browse the remote device. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Browse Remote Device. 3. If your device has no devices in the Bluetooth Devices Folder that supports OBEX File Transfer, then it begins to search for Bluetooth devices nearby. 4. Select the Bluetooth device you wish to browse. If the desired device is not listed, tap Find. 5. Your device begins to establish a file sharing connection. 6.
Send/Receive File(s) or Folder(s) • Single-tap items to select them for transfer. • Double-tap on a folders to open it and see its contents. 1. Select the file(s) or folder(s) that you wish to transfer. You can select items from only one device per transfer session. 2. There are two different ways to initiate the transfer: • Tap File > Send to remote or Get from remote, as applicable. The inappropriate option should be gray. • Tap on the Send to remote icon or Get from remote icon, as applicable.
Delete File(s) or Folder(s) 1. Select the items you wish to delete. You can only delete items from one device at a time. 2. Tap on the File menu. Select Remote device or Local device, wherever the items are located, then tap Delete remote item(s) or Delete local item(s), as applicable. 3. Tap and hold your stylus an item in either the remote or local device that you wish to put in a new folder. In the pop-up menu, select Delete folder. 4. In the Confirm screen, tap Yes. Refresh Remote View 1.
Exit Bluetooth File Explorer To exit the Bluetooth File Explorer, tap File > Exit. Receive Contact or File 1. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Receive Contact or File. 2. The Receive Contact or File status screen appears. Your device waits two minutes for the contact or file. 3. After successfully connecting to the remote device, the screen reports Connected then disappear. The new contact or file should now be on your device. 4.
Assign a Dialing Prefix If you have not already assigned a dialing prefix during the install process, you can do so by following these steps: 1. Tap Start > Settings > System tab > Dialer. 2. Select the appropriate Dialing Prefix, then tap OK. Using the Dialer 1. To use the dialer, the device must already be connected to the Bluetooth phone. You can use the Get Connected! Wizard to do this. Also, the Bluetooth phone must be selected as your favorite. 2. Tap Start > Contacts. 3.
5. Your device connects to your phone and begins dialing. The Dialer can dial a phone number containing any of the following non-numeric characters: * # + . / ! @ - \ space A B C D T P W The following string can also be included in a phone number: (',') The Dialer cannot dial a phone number containing non-numeric characters other than those listed above. HHP recommends that you follow the standard Microsoft Outlook format for phone numbers.
(c) Preparing your Bluetooth passkey. 4. When the search is complete, a list of the discovered Bluetooth phones appears. Choose the phone you wish to connect to, and tap Select. A service discovery phase begins, about 5-10 seconds. 5. As prompted in the next screen, prepare your phone for bonding. For instructions on setting your phone to “Bondable” or “Pairable” mode, refer to your phone manual. Have your passkey ready, then tap Next>. 6. In the next screen, enter the passkey. Tap Reply. 7.
3. As directed on the next two screens, assign the phone a unique name, set the phone to Discoverable mode, and tap Next. 4. The device searches for the phone. When the search is over, a list of the discovered Bluetooth phones appears. 5. Choose the phone you want to connect to, and tap Select. A service discovery phase begins, about 5-10 seconds. 6. The next two screens describe procedures you complete outside of the wizard.
1. Tap Start > Settings > Connections tab > Connections. 2. In the top field, select Internet Settings and tap Modify. Then, tap New. 3. Name=A name that you will remember for future connections. Modem=Bluetooth Phone. Baud Rate=115200. 4. Tap Next. 5. In the Phone number field, enter the dial-up number. Tap Next. 6. Uncheck Wait for dial tone before dialing. Tap Finish. 7. Now you are ready to start the connection. In the Connections screen, under Internet Settings, tap Connect.
• Scroll to the right tab to access the Paired devices list. Highlight your mobile computer, then press OPTIONS. • Scroll to Set as authorized, then press SELECT. • In the confirmation screen, press YES. Automatic Connections for Nokia 6310/8910/8910i: • On the phone, press MENU. • Scroll to 10 Bluetooth, then press SELECT. • Scroll to 4 View Paired Devices, then press SELECT. • Highlight the Dolphin terminal, then press OPTIONS. • Scroll to 3 Request Connection Authorization, then press NO.
11 Wireless WAN (WWAN) Communications with GSM/GPRS Overview Dolphin terminals can be configured with a Siemens® GSM/GPRS quad-band radio module for Wireless WAN connectivity. GSM GSM stands for Global System for Mobile communications. It is an open, non-proprietary wireless wide area networking system that is constantly evolving and growing. One of its great strengths is international roaming capability, which provides standardized dialing in more than 170 countries.
SIM Card SIM stands for Subscriber Information Module. A SIM card stores the subscriber's personal information, GSM/GPRS radio settings, security key, contacts, etc. SIM cards can be installed and removed from compatible mobile devices, enabling you to switch devices without losing your personal information. SIM cards are obtained and activated by the network provider that supports your GSM/GPRS network.
Accessing uPhone Tap Start > Programs > uPhone. Tap one of the icons to launch the program. Navigation Bar Icons When the Dialler or SMS Manager applications are not open, the icons in the Navigation bar at the top of the screen indicates the status of the phone and messaging system. Each icon indicates s specific action and, when tapped, displays a bubble window that lets you know what is happening. Icons and Bubble Messages Icon Description Tap this icon to display: The phone is off.
Icons and Bubble Messages Icon Description Tap this icon to display: Incoming SMS message available. This bubble appears automatically when a new SMS message is received. It contains the sender’s information and the first line of the text message. Bubble Options Tap View to display the full message in SMS Manager. Tap Reply to switch to the SMS Manager Compose screen. The 'To:' field is autofilled with the sender’s address. Tap Save to put the message in the SMS Manager Inbox.
To launch the Dialler, tap Start > Programs > uPhone > Dialler. The program launches and the uPhone Dialler screen opens: Three information lines: Dialler screen Network–name of service provider. Number/Name–dialed, incoming, and outgoing calls. Status–status of the phone. Signal Strength Four bars is optimal. Tap to send a call or accept an incoming call Tap to end a call Tap to clear the Dialler screen Phone keypad - tap the numbers to dial Tap * and # buttons for interactive voice systems; i.e.
When the call is connected, the three information lines display the following: Network Operator Displays the name of the service provider you are using. Name/Number Displays the name and/or number you called. If the number is from your Phonebook, that entry displays. StatusThe status of the call. Idle - means no calls are incoming or outgoing. In Call - means a phone call is in progress. Incoming Call - means that a a call is coming in.
When a second call is coming in, to place the current call on hold Tap the Send button . Press the ENTER key on the keyboard. Press the key combination for sending calls on the keyboard. The Status line of the first call changes to Call on Hold. Tapping Send again restores the call on hold. Making a Second CallTo make a second call, place the current call on hold, then dial the second number. When there are two calls (one active and one held) the status line displays In Call, Call on Hold.
The Tools menu provides the following options: Menu Item Description See Page Phonebook Displays the Phonebook 11-8 Call Log Opens the Call Log 11-11 SMS Manager Opens the SMS Manager Inbox 11-16 Select Skin Selects a new skin for the uPhone Dialler application. N/A Configuration Opens the uPhone Configuration control panel. 11-12 Ringtones Opens the ring tone selection control panel. 11-9 Charging Displays call meter values.
You can access the Phonebook manually by opening the Dialler and going to Tools > Phonebook. When you tap and hold on an entry, a popup menu displays. Dial Opens the Dialler with the number entered ready for dialing. Send SMSOpens the SMS Manager in the Compose screen with the 'To:' field populated with the number. Speed Dial 2-9These eight slots are used to assign the Dialler Speed Dial keys. To assign a number to a Speed Dial slot, tap on an entry to assign the number.
You can preview each tone by selecting the *.wav file in the drop-down list and tapping the Preview button. Use the slider to set the volume for each tone. While the tone is playing, the Preview button changes to a Stop button; tap it to stop the preview. Charging Accessed from the Tools menu, the Charging tool displays call meter values from the network service provider. Tap Tools > Charging and the Charging window opens displaying the current values for the phone.
Tap Tools > USSD. SendSends the text entered in the Message section and begins the USSD session. End Ends the USSD session. MessageEnter text to a USSD portal. Network messageDisplays the USSD message received from the network, allowing a session-based interaction.
From the drop-down list, select the option you want to view. To see everything, select All Calls. Tools Menu ClearDeletes the entire Call Log. Exit Closes the Call Log. uPhone Configuration uPhone Settings enable you to establish the normal operating parameters for uPhone applications. Requirements To open the uPhone configuration tools, the GSM radio must be enabled and an active SIM must be installed. The configuration tools access the network directly.
General Tab Field Description Phone Number This is the phone number stored on the SIM. It is displayed here for information only. Answerphone This is the number to dial to retrieve voicemail messages. To enter a new number, tap on this field and enter the digits. Call waiting Select On or Off to enable or disable call waiting functionality. Call waiting must be set to On for conference calls. PIN protection Select On or Off to enable or disable PIN protection.
If you choose Manual network selection, the drop-down list of available networks activates. Choose a network from this list and tap OK. A wait icon appears while the system accesses the selected network. Divert Tab The divert tab enables you to select divert options for incoming calls when you are unavailable to answer; e.g., when the phone is off, you are out of network coverage, busy, or not able to answer. All Calls diverts all incoming calls automatically.
The Bar tab sets enables you to bar both incoming and outgoing calls. Bar outgoing calls Select one of the following options from the drop-down list: Not barred No restrictions on outgoing calls. International calls Bar international calls. International except… Only international calls to the home country designated on the SIM card can be made. All outgoing calls Bar all outgoing calls.
The Messaging tab enables you to adjust the default SMS settings. Request Delivery Reports By default, the SMS manager receives a confirmation report that each SMS message has been sent. These confirmation reports can take up valuable space and memory. Therefore, you can cancel these reports on this tab by selecting Off and tapping OK. SMS number of retriesThis setting enables you to control the number of times the system will try to send an SMS message until the message is sent.
To Do this… Open a messageTap on the message and the content of the message appears. Delete a messageTap and hold on the message. Tap Delete on the popup menu that appears. Sent Folder The Sent folder displays sent messages. Outbox Folder The Outbox folder displays text messages waiting to be sent. Sending an SMS Message In the task tray at the bottom of the screen, tap New. The new message screen opens with the cursor active in the text area. Tap inside the To: field.
Icons at the Top of the Message Screen Icon Description At the top of the window: Copy selected text. Cut selected text. Paste text. Undo the previous action. This icon appears only in a message that has been sent. Tapping this button will re-send the message. In the task tray at the bottom of the window: Send all messages in the Outbox.
Tap Start > System > Connections tab > uPhone GPRS. The GPRS Settings screen appears with the selected profile in the Current Profile drop-down list. . In the Current Profile drop-down list, select the profile associated with your account. The Details section is already complete. A default GPRS profile (for a modem connection) is created in Microsoft’s connection manager based on the profile selected here.
Tap Manage existing connections. This default GPRS profile loads into the connection manager based on the service provider profile selected in uPhone’s GPRS Settings; see Step 2 above. A modem connection is the default connection type. If you want to create a VPN connection, for example, you need to create a GPRS profile on the VPN tab using the parameters in the following steps. Make sure that GPRS is selected and tap Edit.
Enter the User name and Password provided by your ISP. Tap Finish. Entering your user name and password here in the connection manager profile means that you don’t have to enter them every time you try to connect via GPRS. Tap and hold on the GPRS connection and select Connect on the popup menu. You terminal attempts to connect to the GPRS network. When the connection is established, the double arrows appear in the . Navigation bar To verify your connection, tap Start > Programs > Internet Explorer.
11 - 22 Rev (e) Dolphin® 7900 Series User’s Guide–Preliminary
12 Applications Dolphin terminals ship with the following Microsoft applications installed: • Calendar (page 12-1) • Contacts (page 12-3) • Tasks (page 12-5) • Notes (page 12-7) • Messaging (page 12-7) • Pocket Internet Explorer (page 12-11) • Pocket Word (page 12-14) • Pocket Excel (page 12-15) • Windows Media Player for Pocket PC (page 12-17) • MSN Messenger (page 12-18) • Pictures (page 12-19) Note: Microsoft® Money, Microsoft® Reader are NOT installed on the Dolphin 7900 when shipped but may be install
3. Using the input panel, enter a description and a location. Tap first to select the field. 4. If needed, tap the date and time to change them. 5. Enter other desired information. To see all available fields, hide the input panel. 6. To add notes, tap the Notes tab. You can enter text, draw, or create a recording. For more information on creating notes, refer to Notes on page 12-7. 7. When finished, tap OK to return to the calendar.
Creating Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request is created automatically and sent either when you synchronize Inbox or when you connect to your e-mail server. Indicate how you want meeting requests sent by tapping Tools and then Options. If you send and receive e-mail messages through ActiveSync, select ActiveSync. Scheduling a Meeting 1. Create an appointment. 2.
Creating a Contact 1. On the Contacts screen, tap New. 2. Using the SIP or Dolphin keyboard, enter the contact’s information. Scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap Categories, then select a category from the list. (In the contact list, you can display contacts by category.) 4. To add notes about this contact, tap the Notes tab. For more information on creating notes, refer to Notes on page 12-7. 5.
Using the Summary Screen When you tap a contact in the contact list, a summary screen displays their information. Tasks Note: To change the way information is displayed in the list, tap Tools > Options.
Creating a Task 1. Tap New. 2. Using the SIP or Dolphin keyboard, enter the task information. If the input panel is open, you need to hide it to see all available fields. 3. Tap Starts to enter a start date and/or Due to enter a due date for the task. 4. To assign the task to a category, tap Categories and select a category from the list. In the task list, you can display tasks by category. 5. To add notes, tap the Notes tab. For more information on creating notes, refer to Notes on page 12-7. 6.
Notes Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. If a note is open when you create the recording, it will be included in the note as an icon. Creating a Note 1. Tap New. 2. Type your note using the SIP or the Dolphin keyboard. Messaging Use Messaging to send and receive e-mail messages; this is your email Inbox. To use e-mail, you can: • Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your desktop computer.
• Messages are copied from the mail folders of Exchange or Outlook on your desktop computer to the ActiveSync folder in Inbox on the terminal. By default, you will receive messages from the past three days only, the first 100 lines of each message, and file attachments of less than 100 KB in size. • E-mail messages in subfolders must be selected in ActiveSync on your desktop computer to be transferred.
Using the Message List Messages you receive are displayed in the message list. By default, the most recently received messages are displayed first in the list and unread messages are displayed in bold type. When you tap on a message to open it, the following screen appears: Composing Messages 1. Tap New. 2. In the To field, enter the e-mail or SMS address of one or more recipients, separating them with a semicolon (;), or select a name from the contact list by tapping the Address Book button.
5. If you are sending an SMS message and want to know if it was received, tap Edit, Options, and select Request SMS text message delivery notification before sending the message. Managing E-mail Messages and Folders Messages are displayed in one of five folders for each service you have created: Inbox, Deleted Items, Drafts, Outbox, and Sent Items. The Deleted Items folder contains messages that have been deleted on the device.
Folder Behavior with a Direct Connection to an E-mail Server The behavior of the folders you create depends on whether you are using ActiveSync, SMS, POP3, or IMAP4. ActiveSync If you use ActiveSync, e-mail messages in the Inbox folder in Outlook on your desktop computer are automatically synchronized with the terminal. You can select to synchronize additional folders by designating them for ActiveSync. The folders you create and the messages you move will then be mirrored on the server.
Browse the Internet on Your Terminal Note: You must set up a connection to your ISP or corporate network using Connections before browsing; see Using an ISP on page 8-8.. If you select Pocket Internet Explorer before setting up the network connections, a screen may appear allowing you to proceed to the connection settings screen. 1. Open Internet Explorer (Start > Internet Explorer). 2. To connect and start browsing, tap View and then Address Bar. 3.
Creating and Synchronizing Mobile Favorites If you are using Microsoft Internet Explorer 5.0 or later on your desktop computer, you can download Mobile Favorites to the terminal. Synchronizing mobile favorites downloads Web content to your device so that you can view pages while you are disconnected from your ISP and desktop computer. Use the Internet Explorer plug-in installed with ActiveSync to create mobile favorites 1.
You’ll see the page that was downloaded the last time you synchronized with your desktop computer. If the page is not on the terminal, the favorite will be dimmed. You will need to synchronize with your desktop computer again to download the page to the terminal, or connect to the Internet to view the page. Mobile favorites take up storage memory on the terminal.
You can change the zoom magnification by tapping View > Zoom, and then selecting the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document. If you’re opening a Word document created on a desktop computer, select Wrap to Window on the View menu so that you can see the entire document. Creating a Word File To create a new file, tap Start > Programs > Pocket Word > New. A blank document appears.
Creating an Excel File To create a new file, tap Start > Programs > Pocket Excel > New. A blank workbook appears. If you’ve selected a template for new workbooks in the Options dialog box, that template appears with appropriate text and formatting already provided. If your workbook contains sensitive information, you can protect it with a password. To do so, open the workbook, tap Edit, and then Password.
Windows Media Player for Pocket PC Use Microsoft Windows Media Player (WMP) for Pocket PC to play digital audio and video files stored on the terminal. To switch to Windows Media Player for Pocket PC, tap Start > Windows Media. After a media file has been loaded, you can play, pause, stop, song advance/reverse, mute sound, or adjust volume. This slider indicates the progress of media playback. Tools Menu The tools menu allows you to perform several important functions.
Settings allows you to configure several important aspects of WMP. Properties gives a detailed listing of a media file's attributes. Open URL allows you to open WMP-compliant media from a network or Internet resource. Add Web Favorite adds a streaming media file that is currently playing to web favorites. Repeat plays a playlist repeatedly. Shuffle plays items in a playlist in a random order. MSN Messenger MSN Messenger is an instant messaging program that lets you: • See who is online.
2. Tap Tools > Options > Account tab. 3. In the Accounts tab, enter your Passport or Exchange account information. Be sure to indicate the service you’re using to connect - Messenger or Exchange. 4. When complete, tap OK. You are returned to the sign-in screen. 5. To sign in, tap the sign-in screen and enter your e-mail address and password. Note: If you already use MSN Messenger, your contacts will show up on your device without being added again.
12 - 20 Rev (e) Dolphin® 7900 Series User’s Guide–Preliminary
13 Dolphin HomeBase Overview As the hub of your Dolphin 7900 system, the Dolphin HomeBase charging and communication cradle supports both RS-232 and USB communications, enabling your terminal to interface with the majority of PC-based enterprise systems. Communications RS-232 transmits data at speeds of up to 115 Kbps. With USB port, the data transmission rate goes up to 12 Mbps.
Front Panel Terminal Well DOCK LED AUX Battery LED COMM LED AUX Battery LED Indicates status of the battery charging in the auxiliary battery well; see page 13-5. This color… means… Orange The auxiliary battery is charging. Green The auxiliary battery has completed charging and is ready for use. COMM LED This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host PC.
Back Panel Auxiliary Battery Well DC Power RS-232 Port Jack USB Port Auxiliary Battery Well The auxiliary battery well charges an additional Li-ion battery pack independently of the terminal well. This feature ensures that you can always have a fully-charged battery for your Dolphin terminal; see Charging a Spare Battery in the Auxiliary Battery Well on page 13-5. DC Power Jack Use a power cable from Hand Held Products to supply power to this power jack.
RS-232 Serial Connector The following diagram displays the pins of the RS-232 serial connector of the Back Panel (see page 13-3). Pi n # Description 1 2 3 4 5 6 7 8 9 Interna l Jumpe r to Pi n 6 TXD RXD DSR GND DTR CTS R TS RI Note: Signals referenced are for a DTE device. The HomeBase is at a right-angle to the printed circuit board (PCB). The ninth pin has a ring indicator (RI). Powering the Dolphin HomeBase The terminal requires 9.
Charging the Main Battery The Dolphin HomeBase powers the terminal and fully charges its main battery pack in less than four hours. To check battery power, see Power on page 7-10. To Power a Terminal and Charge its Main Battery 1. Install the battery pack in the terminal; see Install the Main Battery Pack on page 2-5. 2. Power the HomeBase; see Powering the Dolphin HomeBase on page 13-4. 3.
ActiveSync Communications with the HomeBase The HomeBase can communicate via USB or RS-232 using ActiveSync 3.7 or higher. The HomeBase should have only one type of interface cable connected at a time, either USB or RS-232. USB The USB Port (see page 13-3) on the back panel allows the Dolphin terminal to communicate with a PC or to networked through a USB hub. The HomeBase acts as a USB device by interfacing the USB signals of the Dolphin to the USB signals of the host computer.
4. Tap Options. 5. Select Enable PC sync using this connection, and select ‘USB Connection from the drop-down list. 6. Tap OK and place the Dolphin in the HomeBase. The Dolphin terminal attempts to start an ActiveSync connection with the PC automatically. Setting up the PC for ActiveSync Communications Verify that ActiveSync on the PC has selected the appropriate communication type by clicking File > Communication Properties. The Allow USB connection with this desktop computer box must be checked.
RS-232 Pin Configuration HomeBase /Host Port (DCE) IBM AT DB9 (DTE) IBM XT DB25 (DTE) Modem DB25 (DCE) 2 / (RD) 2 3 2 3 / (TD) 3 2 3 5 / (SG) 5 7 7 4 / (DTR) 4 20 6 6 / (DSR) 6 6 20 7 / (RTS) 7 4 5 8 / (CTS) 8 5 4 Pin / Input Signal Note: The HomeBase cannot be daisy-chained. Setting up the Terminal for ActiveSync Communications via RS-232 1. On the terminal, tap Start > ActiveSync > Tools > Options. ActiveSync opens displaying the PC tab. 2.
Setting up the PC for ActiveSync Communications ActiveSync must be installed and configured for RS-232 on the desktop computer to sync successfully with a Dolphin terminal that is configured for RS-232 communication. Verify that ActiveSync on the PC has the correct ActiveSync Connection Settings. Open ActiveSync and click File > Communication Properties. Note: You can have the USB connection box checked in addition to the serial cable box without affecting processing. However, you should use RS-232 or USB.
Mounting the HomeBase Set the Dolphin HomeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the HomeBase. When choosing a location, bear in mind that: • The mounting location must allow users easy access to the AUX Battery LED (see page 13-2). • The serial, USB, and power jack face straight out of the rear panel.
2. Attach the bottom panel to the mounting bracket - match the holes to the secured screws. Open slot for the connector and power cables 3. Fasten the screws to secure the HomeBase to the mounting bracket. 4. Turn the secured HomeBase right side up.
5. Using the appropriate screws, secure the mounting bracket to the wall or vertical surface as shown.
14 Dolphin Mobile Base Overview The Dolphin Mobile Base charging and communication cradle is designed specifically for in-premise and in-transit data collection applications. It features a flexible mounting bracket, a cigarette lighter adapter, and a power cable to adapt it to your environment. When a terminal is seated in the Mobile Base, its main battery pack charges in less than four hours.
Dolphin Mobile Base Hardware Overview Front Panel Latch Spring Arm Assembly Terminal Well DOCK LED COMM LED Latch You can use the latch at the top of the spring arm assembly to snap a seated terminal into place. The latch can rest on top of the hand strap slot on the back panel of the terminal; see page 14-6. Spring Arm Assembly For more information, see Spring Arm Assembly on page 14-5.. Terminal Well Place the terminal in this well to communicate with a host device and charge the main battery pack.
COMM LED Indicates the status of data transfer between the host device and the Dolphin terminal COMM LED Color Indicates that… Red Data is being sent from the host device to the Dolphin Mobile Base. Green Data is being sent from the Dolphin Mobile Base to the host device. Orange Data is being sent at high data rates. Bottom Panel Power Supply Connector RS-232 Serial Communications Port Power Supply Connector Attach a power cable from Hand Held Products to this connector.
RS-232 Serial Communications Port Use a standard serial cable to connect to the host device via RS-232. The following diagram displays the pin diagram of the serial connector of the bottom panel of the Mobile Base. Pin # Description 1 2 3 4 5 6 7 8 9 Internal Jumper to Pin 6 TXD RXD DSR GND DTR CTS RTS 5 VOLT OUT Signals referenced are for a DTE device. The Mobile Base connector is straight to the printed circuit board (PCB). The ninth pin sends 500mA at 5 Volts power out.
Back Panel Latch Spring Arm Assembly Ball Joint Spring Arm Assembly The spring arm assembly holds the terminal securely in place and connects the Mobile Base to the ball joint. Ball Joint There are two ball joints: one on the back of the Mobile Base and one on the mounting bracket. Both ball joints are inserted into the mounting bracket and secured by the turnscrew.
Mounting the Dolphin Mobile Base There are three items you use to mount the Dolphin Mobile Base: the ball joints on the both the back panel and the ball joint connector, the mounting bracket, and the turnscrew. Latch - securing the terminal Turnscrew Mounting Bracket Ball Joint Connector Turnscrew The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots.
2. On the mounting bracket, loosen the turnscrew. 3. Insert both ball joints into the mounting bracket. 4. Tighten the turnscrew to secure both ball joints. Powering the Dolphin Terminal When seated in a Mobile Base that is connected to the appropriate power source, the Dolphin terminal receives the power to charge its main battery and run its internal circuitry. Keep the Mobile Base plugged into the power source so that the Dolphin terminal battery pack stays fully charged.
Configuring the Terminal for ActiveSync Communications 1. On the terminal, tap Start > ActiveSync > Tools > Options. ActiveSync opens displaying the PC tab. 2. In the Use this PC drop-down list, select the name of the host PC. 3. Select Sync with this PC during manual sync to indicate that the terminal syncs with the selected host PC when synchronization is run from the terminal. 4. Tap Options. 5.
15 Dolphin ChargeBase Overview The Dolphin ChargeBase is a four-slot charging cradle that can power four Dolphin terminals, and charge their main batteries in less than four hours. Each charging slot charges terminals independently of the other slots. Charging The Dolphin ChargeBase completes a full charge of the main battery pack in less than four hours.
Dock LED Each terminal well displays a Dock LED on the front that lights solid green when a terminal is properly seated, which means that the terminal and the base are connected. Charge LEDs Each terminal well displays a Charge LED on the front that lights green to indicate charging. For details, see Charging Terminals in the ChargeBase on page 15-3. Back Panel Power Supply Connector Power Supply Connector This connector receives input from the power adapter.
2. Plug the power cord into the power adapter. 3. Plug the power connector cable into the power connector on the back panel of the ChargeBase. 4. Plug the power cord into a standard wall outlet. 5. On the power adapter, turn the power switch to the ON position. The LEDs light as the ChargeBase powers up. 6. The Dolphin ChargeBase is ready to begin charging terminals. Inserting and Removing Terminals To insert a terminal, hold the terminal with the bottom panel perpendicular to the base.
Using the DIN Rail All Dolphin charging/communication cradles have a slot for a 7.5mm (high) X 35mm (wide) DIN rail on the bottom panel that enables you to mount to a desk or secure, flat surface. 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel. 2. Turn the ChargeBase and DIN Rail right side up. 3. Secure the DIN Rail to a stable, flat horizontal surface. Using the Mounting Brackets A wall mount kit can be purchased separately.
2. Attach the bottom panel to the two mounting brackets. Washer/nut sets and screws in slots 3. Using the nuts and bolts, secure the mounting brackets to the bottom panel.
4. Secure the mounting brackets to an appropriate horizontal surface.
16 Dolphin QuadCharger Overview The Dolphin QuadCharger is a four-slot charging station that can charge a Li-ion battery in less than four hours. The fourth slot features a battery analyzer that completely resets and re-calibrates a battery and displays its resulting capacity. Compatibility The QuadCharger is compatible with the Li-ion batteries that power Dolphin 7900 Series terminals. Charging Process Each charging slot works independently of the other three.
Battery Capacity Indicator LEDs These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For more information, see Battery Capacity Indicator LEDs on page 16-2. Analyze Button Press this button to start a battery analyze cycle; see Using the Battery Analyzer on page 16-4.. Status LEDs A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the batteries in its slot.
Supplying Power to the QuadCharger You must use the power adapter cable from Hand Held Products so that voltage is adjusted appropriately. 1. Locate the AC power adapter cable and plug it into the power source. 2. Connect the power cable to the power adapter. 3. Connect the power cable to the supply connector on the back of the QuadCharger. 4. Press the power switch to the ON position. The power LED illuminates green, and the charger performs a self-diagnostic test that lasts approximately five seconds.
Using the Battery Analyzer Purpose Using the Charge/Analyze slot helps you monitor the charge capacity of Li-ion batteries over time. The LEDs in this slot provides a readout of the battery’s capacity after a complete discharge and full charge. They tell you the maximum charge level the battery can hold. Location The battery analyzer is located in the fourth slot of the ChargeBase. Only batteries in this slot can be analyzed.
Mounting the QuadCharger The Dolphin QuadCharger should be on a dry, stable surface. To easily adapt the QuadCharger to your environment, it can be mounted on a flat, horizontal surface such as a desktop or workbench, or a flat, vertical surface such as a wall. When choosing a location, always bear in mind that • the mounting location must allow users easy access to power switch and power connector.
Wall Mounting The following graphic displays how mount a QuadCharger to a wall: Troubleshooting If you encounter problems with your Dolphin QuadCharger, refer to chart below for possible solutions. If problems persist, please contact Technical Support. Problem Issue The Status LED does not come on when Check the power connections on the Dolphin QuadCharger; make sure the I insert a battery pack into the Dolphin POWER switch is ON and the battery pack is properly seated.
17 Customer Support Product Service and Repair Hand Held Products provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, return the unit to Hand Held Products (postage paid) with a copy of the dated purchase record attached. Contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product.
Technical Assistance If you need assistance installing or troubleshooting, please call your Distributor or the nearest Hand Held Products technical support office: North America/Canada: Telephone: Fax number: E-mail: (800) 782-4263, option 4 (8 a.m. to 6 p.m. EST) (315) 685-4960 natechsupport@handheld.com América Latina: Teléfono: Teléfono: E-mail: (800) 782-4263, opción 8, opción 3 (704) 998-3998, opción 8, opción 3 latechsupport@handheld.
Limited Warranty Hand Held Products, Inc. ("Hand Held Products") warrants its products to be free from defects in materials and workmanship and to conform to Hand Held Products’ published specifications applicable to the products purchased at the time of shipment.
17 - 4 Rev (e) Dolphin® 7900 Series User’s Guide–Preliminary
Hand Held Products, Inc. 700 Visions Drive P.O.